Updated Nov 22, 2026· 9 min read

Key takeaways

  • Compare the best bow rakes for leveling soil, spreading gravel and prepping beds, with forged and welded steel heads, handle picks and full specs.

As an Amazon Associate we earn from qualifying purchases.

A bow rake is a soil and gravel tool, and it helps to be blunt about that before the picks. The toothed side of the head grades: short, rigid steel tines break up clods, pull soil from high spots into low ones and rake gravel back where it belongs. Flip the head over and the flat back of the bar levels, smoothing a seedbed or a gravel path in long pushing strokes. That two-sided working head is the whole design, and it is also why a bow rake is the wrong tool for gathering leaves. Its tines are spaced to move earth, not to sweep; dragged across a lawn they pierce leaves, clog, and tear at the turf underneath. Leaves are a fan rake’s job, and no bow rake in this guide should be bought as a substitute for one.

Our top pick: Bully Tools 92309 Bow Rake. Runner-up: Truper 31374 Tru Pro Forged Bow Rake.

Two more honest points decide whether a bow rake lasts. First, the head-to-handle connection is where cheap rakes fail. The head takes the full shock every time a tine snags a buried rock or root, and that force concentrates exactly where the head meets the handle — in a loose ferrule, a thin weld, or a single screw. Forged one-piece heads and properly welded joints exist because friction-fit heads work loose. Second, handle material is a real trade-off, not a ranking. Fiberglass will not rot, does not need oiling and shrugs off being left out in the rain, but it transmits more shock to your hands than wood and, once cracked, is finished. A hardwood handle absorbs shock better and can be replaced when it eventually splits, but it needs dry storage and the occasional coat of oil to get that long life. Neither is simply better; they fail differently.

Finally, tine spacing decides what the rake actually does in the ground. Closely spaced tines — roughly an inch apart on the 14- to 16-tine heads below — grade soil finely and leave a smooth seedbed, but they also drag and hold fist-sized rocks instead of passing over them. Wider spacing sheds stone better and suits rough gravel work, at the expense of a coarser finish. Match the spacing to the material you move most, because no head does both ends of that range equally well.

Affiliate Disclosure: This article contains affiliate links. If you buy through a link on this page, we may earn a commission at no additional cost to you. That is how this site stays running, and it does not change which products are listed or how they are described.

What separates the five picks

  • Head construction — forged heads are formed from a single piece of steel and have the fewest joints to fail; welded heads join the tine bar to the bow arms with welds that vary in quality; both beat a stamped, friction-fit head for soil work.
  • Tine count and spacing — 14 to 16 tines is the standard range. More tines on the same width means finer grading; fewer, wider-spaced tines shed rocks.
  • Handle — fiberglass for weatherproofing, wood for shock absorption and replaceability, aluminum for the lightest possible shaft.
  • Length — most of these run 58 to 60 inches overall. Taller users should not go shorter; a short rake turns every pass into bent-back work.

1. Bully Tools 92309 Bow Rake — the heavy welded standard

The Bully Tools 92309 is the rake the rest of this list is measured against, and its argument is thickness. The head is 12-gauge steel — heavier stock than the stamped heads on bargain rakes — with 16 curved tines across a 16-inch head, and the connections are robotically over-welded rather than spot-joined, which speaks directly to the failure point described above. A powder-coat finish slows the rust that bare steel invites the first time the rake is put away damp. It is made in the USA and carries a limited lifetime warranty, and at 3.45 pounds it is not the tank its specification suggests; the weight sits in the head, where it helps the tines bite instead of skating over compacted soil.

The 58-inch fiberglass handle is the weatherproof choice: leave it in an unheated shed all winter and it comes out unchanged. The trade-off, as with all fiberglass, is feel — it passes more of each rock strike up to your hands than a wooden handle would, and the cushioned grip only partly softens that. This is the pick for gardeners whose main work is bed preparation and gravel paths and who want one rake that does not need babying.

Specs

  • Head width: 16 in
  • Tines: 16, curved
  • Head material: 12-gauge steel, welded construction, powder-coat finish
  • Handle: 58 in fiberglass with cushioned grip
  • Weight: 3.45 lb
  • Warranty: Limited lifetime warranty, as stated by the maker

2. Truper 31374 Tru Pro Forged Bow Rake — the forged head on ash

Truper’s Tru Pro line is its professional range, and the 31374 is the forged entry in this guide: the head is forged from a single piece of steel rather than assembled and welded, which removes the welds from the list of things that can crack. The heavy tines are straight rather than curved, and that is a deliberate fit for rock and gravel work — straight tines dig in and pull stone instead of riding over it, and they shed chunky material instead of packing it between curved teeth. For breaking up compacted, stony ground and regrading a gravel drive, this is the head shape that makes sense.

The handle is North American white ash, the traditional choice, and it behaves the way wood does: it flexes a little under load and absorbs the shock that fiberglass passes through, which matters over a long session of breaking ground. It also asks for the traditional upkeep — dry storage and an occasional wipe of oil — and it can be replaced if it ever splits, which a fiberglass shaft cannot. At 3.8 pounds it sits at the heavier end of this list, and that weight is the honest cost of the forged head. Contractors and gardeners who regularly break new or compacted ground are the audience; for light bed tidying it is more tool than the job needs.

Specs

  • Head width: Not published in the listing data reviewed
  • Tines: 15, straight
  • Head material: Forged steel, one-piece head
  • Handle: White ash hardwood (length not published in the listing data reviewed)
  • Weight: 3.8 lb
  • Warranty: Maker’s guarantee against defects, as stated by Truper

3. Truper 32404 Tru Tough Welded Bow Rake — the long fiberglass value pick

The second Truper in this guide is a different tool from a different line, and the contrast is the point. The Tru Tough 32404 is a welded head — 16 teeth joined to the bow — on a 60-inch fiberglass handle, and it adds a comfort detail the others skip: two cushioned grips, one at the end of the shaft and a second partway down, so the lower hand has padding when you are pulling gravel toward you in long strokes. The steel head carries a clear-coated gray finish that makes rust easy to spot early. At about 4 pounds it is not the lightest here, but the length and the second grip make it feel less tiring than the number suggests, particularly for taller users.

The honest limit is the welded head. Welded construction is entirely adequate for grading soil, spreading mulch and maintaining gravel, which is most of what most gardens ask. It is not the head to choose for prying at compacted rubble or levering out buried stone — that abuse belongs to the forged pick above, and a welded joint stressed sideways is where a rake like this will eventually give. Bought for the work it is built for, it is the straightforward long-handle fiberglass option in this list.

Specs

  • Head width: Not published in the listing data reviewed
  • Tines: 16
  • Head material: Steel, welded construction, clear-coated finish
  • Handle: 60 in fiberglass, two cushioned grips (9 in end grip)
  • Weight: About 4 lb
  • Warranty: Maker’s guarantee against defects, as stated by Truper

4. True Temper 1881600 Bow Rake — the traditional short wood handle

The True Temper 1881600 is the old pattern, unchanged because it works: a 14-tine tempered steel head, 14 inches wide, on a 48-inch hardwood handle joined by a steel ferrule. The narrower head and the roughly one-inch tine spacing grade a fine finish, and the short handle is a feature in the right setting — raised beds, small plots and work between established plantings, where a 60-inch shaft is forever knocking into something behind you. Shorter users will also find it the most manageable rake in this guide. Wood’s shock absorption is at its most noticeable in a tool this size, and a hardwood handle that eventually wears out can be swapped for a replacement rather than scrapping the head.

Two limits deserve stating. The head is held by the ferrule rather than riveted through, so the connection should be checked for play each season and the head reseated if it loosens — this is the classic failure of the pattern, and it is manageable only if you actually check. And this is a light-duty design: fine for soil, compost and bed work, out of its depth levering compacted gravel. Within those limits, it is the pick for smaller gardens and for anyone who prefers the feel of wood.

Specs

  • Head width: 14 in
  • Tines: 14
  • Head material: Tempered steel
  • Handle: 48 in hardwood with steel ferrule connection
  • Weight: Not published in the listing data reviewed
  • Warranty: Not stated in the listing data reviewed

5. Fiskars Pro Garden Rake (397940-1001) — the aluminum-shaft modern design

Fiskars’ Pro garden rake takes the bow rake pattern and rebuilds the handle end of it. The shaft is aluminum in a teardrop profile — wider front to back than a round shaft — which keeps the head aligned in your hands and resists the twisting that makes long grading sessions sloppy, while keeping the handle itself light and completely rust-proof. The head is welded steel with hardened tines, and the back edge is shaped as a grading edge for the flat leveling pass, the same two-sided working arrangement as the rest of this list in a more deliberately finished form. Fiskars backs the tool with a lifetime warranty.

The trade-off is the one aluminum always carries: it is the lightest shaft material here and the least tolerant of prying. Used as a rake — pulling, grading, leveling — it will do everything the steel-headed picks do with less arm fatigue. Used as a lever against a buried rock, an aluminum shaft can bend where fiberglass flexes and wood complains. Buy it for reach, weight and corrosion resistance, and let a pry bar be a pry bar.

Specs

  • Head width: Not published in the listing data reviewed
  • Tines: Count not published in the listing data reviewed; hardened steel tines
  • Head material: Steel, welded, with a flat grading edge on the back
  • Handle: 60 in aluminum, teardrop-profile shaft
  • Weight: Not published in the listing data reviewed
  • Warranty: Lifetime warranty, as stated by the maker

Choosing and looking after a bow rake

Choose by the material you move. Fine soil and seedbed work reward the closer-spaced 14- and 16-tine heads and a flat back you will actually use for the leveling pass. Gravel and stony ground reward straight, heavy tines and a forged or thick-gauge head, with wider spacing that sheds rock. Then choose the handle for your storage and your hands: fiberglass or aluminum if the rake lives in a damp shed and you do not want a maintenance routine, wood if you value shock absorption and a handle you can replace.

Care is short and mostly about the connection. Knock soil off the head before storing, hang the rake rather than standing it on its tines, and give a steel head a wipe of oil before winter if it lives anywhere damp. Once a season, grip the head and try to twist it against the handle; any play at the ferrule or joint is the failure this article opened with, arriving on schedule — reseat or tighten it then, not after the head comes off mid-stroke in a gravel path.

C
Camping Spots Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Bow Rakes for Lawns, Gardens and Gravel…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.