Updated Nov 22, 2026· 8 min read

Key takeaways

  • Compare the best climbing holds for home walls and training boards: screw-on training chips, bolt-on mixed sets and kids' starter packs, with full specs.

As an Amazon Associate we earn from qualifying purchases.

A home climbing wall lives or dies by its holds. The plywood, framing and finish matter, but the shapes bolted to that plywood decide whether a garage wall becomes a serious training tool, a family play feature, or a panel of plastic that gathers dust by spring. The five sets below cover the main ways people actually build at home: small screw-on chips for footwork and finger training, mid-size bolt-on mixed sets for general home walls, and smaller-hand starter packs sized for kids.

One honest point before the picks: no hold set fixes a weak wall. Every set here assumes a properly built structure behind it — 3/4 inch plywood panels fastened into studs or framing, never drywall alone. Bolt-on holds need T-nuts hammered into the back of the panel on a grid, and each hold is only as trustworthy as the bolt, the T-nut and the panel it clamps. Read the hardware list in each Specs block carefully, because what is in the box varies more between these sets than the holds themselves.

What to look for in climbing holds

Mounting style. Bolt-on holds fasten with a single socket-head bolt into a T-nut behind the panel. They are the standard for training boards because they hold torque well and can be moved around a T-nut grid. Screw-on holds fasten with wood screws driven straight through the hold body into the plywood. They can go anywhere on the panel, which makes them ideal for small footholds and chips that need to sit between T-nut positions, but they leave screw holes when moved.

Material and texture. Gym-grade holds are poured polyurethane: light, slightly flexible, and textured with a fine, rock-like grain that stays grippy without shredding skin. The durometer — the hardness of the cured material — changes the feel; softer pours feel friendlier on fingers, harder pours feel crisper and wear slower. Many family and playground-style sets are molded plastic resin instead. Resin holds are typically harder, smoother and heavier for their size, with a glossier texture that climbers describe as less forgiving on steep walls but perfectly serviceable on vertical kids’ walls and play panels.

Hold types. Jugs are deep, bucket-like handholds for easy moves and warm-ups. Crimps are thin edges that load the fingertips. Slopers are rounded, featureless shapes that demand friction and body tension. Pinches squeeze between thumb and fingers. Chips are the smallest category — tiny screw-on pieces used mostly as footholds or as desperate handholds on training boards. A balanced home wall wants a spread of all of them; a set that is all one shape limits the problems you can set.

Hardware completeness. Count the bolts, T-nuts and screws in the box against the hold count. A set that includes one bolt and one T-nut per hold can go straight onto a finished panel. A set that ships holds only means a separate hardware order before the first route goes up.

1. Metolius PU Greatest Chips Screw-On Holds, 40-Pack

This is the training pick of the group, and the only set here from a dedicated climbing-hold maker with a long gym pedigree. The Greatest Chips are 40 small screw-on pieces — footholds, small handholds, plates, rails and modular shapes, most roughly two to three inches across — poured in textured polyurethane with a sandstone-like grain. On a training board they do the unglamorous work that makes home walls effective: precise feet on steep panels, crimpy rails for finger-strength circuits, and filler pieces that complete problems set with bigger bolt-on holds.

Because they screw on, the chips can be placed anywhere, including tight spots between T-nuts and along panel edges where bolt-on holds cannot sit. The trade-off is commitment — every reposition leaves small screw holes in the plywood. The set includes self-drilling screws and instructions, so it can go onto a finished wall the day it arrives. These are not a standalone starter set for a first wall; they are the set that makes an existing wall train harder.

Specs

    • Hold count: 40
    • Hold types: Screw-on chips — footholds, small handholds, plates, rails and modulars, approx. 2–3 in each
    • Material: Textured polyurethane resin
    • Mounting: Screw-on
    • Hardware included: Self-drilling screws and instructions

    2. TOPNEW 32 Rock Climbing Holds

    The TOPNEW set is the largest bolt-on package here: 32 molded resin holds in a spread of large, medium and small sizes and five colors, shaped as a general-purpose mix for a home wall rather than a single grip type. For a first build on a standard 4×8 foot panel, 32 holds is a workable density — enough to set several distinct problems without the wall feeling empty.

    The hardware package is the strong point. The box includes 32 M10 bolts, washers and weld nuts (the listing’s term for its T-nut style inserts), plus a hex wrench, and the bolts suit panels up to 1¼ inches thick, which covers standard 3/4 inch plywood with room to spare. The maker states a 230 lb capacity per the listing. The resin texture is smoother than poured polyurethane, so on overhanging walls these holds will feel less secure than gym holds; on vertical and slightly angled panels — the realistic home build — that matters far less.

    Specs

      • Hold count: 32
      • Hold types: Mixed large, medium and small holds in assorted shapes and 5 colors
      • Material: Plastic resin
      • Mounting: Bolt-on
      • Hardware included: 32 M10 bolts, washers, weld nuts and hex wrench; fits boards up to 1¼ in thick
      • Maker-stated capacity: 230 lb

      3. ZENFUN 25 Pack Rock Climbing Holds

      ZENFUN’s 25-pack is aimed at the backyard and basement family wall: 25 resin holds in five colors, in a range of shapes and sizes, with a full bolt-on hardware kit — 54 bolts, weld nuts and washers are included, which is more fasteners than holds, plus an Allen wrench for installation. The maker states a 230 lb capacity for the set.

      The unusual extra is an 8.5 foot knotted climbing rope bundled in the box, which points the set squarely at play-structure and kids’ wall builds rather than training boards. As with the other resin sets, expect a harder, smoother texture than polyurethane: fine for vertical panels, foot-friendly in sneakers, and less at home on steep angles. For a family wall where the goal is movement and play rather than grade progression, the complete hardware count and the spare fasteners make setup straightforward.

      Specs

        • Hold count: 25, plus an 8.5 ft knotted climbing rope
        • Hold types: Mixed shapes and sizes in 5 colors
        • Material: Plastic resin
        • Mounting: Bolt-on
        • Hardware included: 54 bolts, weld nuts, washers and Allen wrench
        • Maker-stated capacity: 230 lb

        4. Escape Climbing Kids’ 21-Hold Rock Climbing Starter Pack

        Escape Climbing is a specialist hold company based in Minneapolis, Minnesota, and this starter pack is its small-hands offering: 21 holds sized for children’s hands and feet, poured in bright colors from polyurethane — the same class of material the company pours for gyms, and one it describes as a fully cured, non-toxic thermoset polymer. Twenty-one holds are enough to fill a single 4×8 foot sheet of plywood, roughly 32 square feet of wall.

        The hardware is complete and thought through for home use: 21 bolts and 21 T-nuts are included, and the hardware is outdoor-rated, so the same pack can build an indoor basement wall or an outdoor play wall, with the caveat from the maker that colors fade over time in direct sun. The holds are also shaped to work with regular tennis shoes, which lowers the barrier for a play wall considerably. Adults building a training board should look at the Metolius chips instead; this pack is honestly and specifically a kids’ set, and it is better at that job than the generic resin sets.

        Specs

          • Hold count: 21
          • Hold types: Small holds sized for kids’ hands and feet, bright assorted colors
          • Material: Polyurethane (poured, made in Minneapolis, MN, USA)
          • Mounting: Bolt-on
          • Hardware included: 21 bolts and 21 T-nuts, outdoor-rated
          • Coverage: Fills a 4×8 ft plywood sheet (approx. 32 sq ft)

          5. KINSPORY 20-Piece Pig Nose Rock Climbing Holds Set

          The KINSPORY set takes its name from its shapes: 20 rounded, pig-nose-style resin holds with two lobes and a friendly, jug-like profile that suits beginners, kids and anyone building a low-angle wall where positive holds matter more than variety. Two blue auxiliary handles are included alongside the 20 holds, useful as start and finish grips or as assist holds low on a play wall.

          Hardware is complete for a bolt-on build: 40 M10 x 40 mm bolts — two fasteners’ worth of hardware per hold position once washers and weld nuts are counted — along with the washers and weld nuts themselves. The resin construction and rounded shapes put this set in the same family as the TOPNEW and ZENFUN picks: best on vertical panels and play walls, not a substitute for textured polyurethane on a steep training board. Within that lane, the uniform positive shapes make it the most approachable set here for very young climbers.

          Specs

            • Hold count: 20 holds, plus 2 auxiliary handles
            • Hold types: Rounded pig-nose style holds in assorted colors
            • Material: Plastic resin
            • Mounting: Bolt-on
            • Hardware included: 40 M10 x 40 mm bolts, washers and weld nuts

            Building the wall these holds deserve

            Whichever set you choose, the wall underneath follows the same rules. Frame with studs or equivalent framing at standard spacing, skin it with 3/4 inch plywood, and drill the T-nut grid before the panel goes up — a grid around 8 inches apart in both directions gives setters real options. Hammer T-nuts in from the back, keep bolts snug without over-torquing (resin and polyurethane holds alike can crack or spin if a bolt is forced), and check holds periodically for spinners, since a hold that rotates under load should be re-seated or replaced. Leave landing space below the wall and pad it; home walls are bouldering-height structures, and falls onto bare concrete undo all the careful hardware work above.

            Match the set to the wall you are actually building. A training board wants texture and small holds — start with the Metolius chips alongside larger bolt-ons. A general home wall wants count and hardware completeness, which is where the TOPNEW 32 earns its place. A kids’ wall wants small, positive, shoe-friendly shapes, covered by the Escape Climbing pack and the KINSPORY set. Buy the wall you will still be using in a year, not the one that looks hardest on day one.

            Affiliate Disclosure: This article contains affiliate links. If you buy through these links, we may earn a commission at no additional cost to you.

            C
            Camping Spots Editorial Team
            We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
            Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.

            More from Amazon

            Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

            Amazon Prime

            Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

            Start a Prime free trial
            Prime for Young Adults

            A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

            See Prime for Young Adults
            Audible

            Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

            Try Audible free
            Amazon Music Unlimited

            Ad-free music streaming. Eligible new subscribers can start with a free trial.

            Try Music Unlimited free

            As an Amazon Associate we earn from qualifying purchases.