Updated Nov 22, 2026· 10 min read

Key takeaways

  • Compare the best downriggers for salmon, trout and walleye trolling, from clamp-on manuals to networked electrics, with specs and mounting tips.

As an Amazon Associate we earn from qualifying purchases.

Salmon, trout and walleye rarely feed at the surface once the sun is up. They hold on the thermocline, along a break, or under a school of bait, and they stay in that narrow band while your lure needs to stay there too. A downrigger solves the depth problem mechanically: a heavy weight on a cable carries your line down, a release clip holds it, and when a fish strikes, the line pops free so you fight the fish, not the weight. The result is precise, repeatable depth control at normal trolling speeds, pass after pass.

Our top pick: Cannon Magnum 10 Electric Downrigger. Runner-up: Cannon Optimum 10 TS Electric Downrigger.

The five downriggers below cover the realistic range of trolling boats, from a clamp-on unit for a small aluminum hull to a networked electric for a multi-rigger salmon setup. The honest dividing line is manual versus electric, and it is really a depth-and-frequency decision. If you fish 30 to 50 feet a few times per outing, a hand crank is simple and dependable. If you are cycling a 10 lb weight up from 100 feet every time a rod fires, all day, the cranking stops being charming very quickly. Read the mounting notes just as carefully, because on small boats the mount decides whether a downrigger works at all.

Affiliate Disclosure: This article contains affiliate links. If you buy through a link here, we may earn a commission at no extra cost to you. Specifications come from manufacturer data and Amazon listings.

1. Cannon Magnum 10 Electric Downrigger

The Magnum 10 is the straightforward electric workhorse in Cannon’s lineup and the default choice for anglers who troll deep water several days a week. Its motor retrieves at up to 250 feet per minute, so a weight parked at 100 feet is back at the surface in well under half a minute, and the Auto Up feature stops the weight right at the waterline instead of slamming it into the boom. Positive Ion Control applies a small voltage to the cable, and the sealed IP68 connections suit boats that live in wet, salty environments.

It ships ready to mount with a swivel base, a universal mounting base and a dual-axis rod holder, and a manual crank handle rides along as a backup if the battery dies. There is no screen and no depth memory, so you drive it with a simple switch and read the three-digit counter. For salmon and lake trout anglers who want electric speed without paying for electronics they will not use, that trade is usually the right one.

Specs

  • Type: Electric
  • Retrieval speed: Up to 250 ft/min
  • Weight capacity: Up to 20 lb
  • Boom: Telescopic stainless steel, 24 to 53 in
  • Cable: 250 ft of 150 lb test stainless steel
  • Features: Auto Up, Positive Ion Control, IP68 waterproof connections
  • Mount: 360-degree swivel base and universal mounting base included
  • Depth counter: Three-digit
  • Warranty: Limited lifetime

2. Cannon Optimum 10 TS Electric Downrigger

The Optimum 10 TS is the connected flagship. A 3.5-inch full-color LCD replaces the plain counter, and the unit stores up to five preset depths, so returning to the band where the last fish hit is a button press instead of a guess. Depth Cycle moves the weight up and down through a range automatically, which suits walleye and suspended trout that follow bait rather than structure, and bottom tracking lets a compatible fish finder hold the weight a set distance off the bottom along a break.

Up to four Optimum units can network wirelessly and be run from one helm or from the Cannon app, which matters on boats fishing two riggers a side. The Tournament Series build adds a stainless steel spool and the white housing. It is the most capable rigger here, and also the one that asks the most of your battery and your wiring. If you fish one depth band all morning and rarely change it, the presets and screen are convenience rather than necessity, and the Magnum 10 covers the same depths with less to go wrong.

Specs

  • Type: Electric
  • Display: 3.5 in full-color LCD
  • Retrieval speed: Variable, up to 250 ft/min
  • Weight capacity: Up to 20 lb
  • Boom: Telescopic stainless steel, 24 to 53 in
  • Spool: Stainless steel
  • Features: 5 preset depths, Depth Cycle, bottom tracking with compatible fish finder, Waterline Zero, Positive Ion Control
  • Networking: Wireless, up to four units, Cannon app control
  • Depth counter: Digital, on display

3. Cannon Uni-Troll 10 TS Manual Downrigger

The Uni-Troll 10 TS is the manual rigger to buy if you fish genuinely deep water without a battery budget for electrics. The 2:1 retrieval ratio pulls in roughly two feet of cable per crank, the fastest practical gearing in a hand unit, and the one-hand clutch deploy lets you lower the weight under control while your other hand stays on the rod. The Tournament Series version adds a stainless steel spool and a telescopic stainless boom that stretches from 24 to 53 inches, which helps spread lines when two riggers run off the corners.

Be honest about the workload before choosing it. Raising a 10 lb ball from 100 feet on a 2:1 crank is very doable once; doing it twenty times between strikes, resets and snags is a workout that shapes your whole day. Anglers who troll 40 to 70 feet for trout and walleye will find it quick and pleasant. Anglers parked over 100 feet of Great Lakes water all season usually end up converting to electric within a year, and the Uni-Troll becomes the backup.

Specs

  • Type: Manual
  • Retrieval: 2:1 ratio, one-hand clutch deploy
  • Weight capacity: Up to 20 lb
  • Boom: Telescopic stainless steel, 24 to 53 in
  • Spool: Stainless steel
  • Cable: 200 ft of 150 lb test stainless steel
  • Mount: Low-profile swivel base
  • Rod holder: Dual-axis adjustable
  • Depth counter: Three-digit analog

4. Cannon Uni-Troll 5 Manual Downrigger

The Uni-Troll 5 keeps the core Uni-Troll system, the same 2:1 retrieve, one-hand clutch deploy and three-digit counter, in a smaller unit built around a fixed 24-inch boom. The spool is composite instead of stainless and the mounting base is Cannon’s universal base rather than the low-profile swivel, but the working parts that decide your day, gearing, clutch and counter, are the same as on the bigger manual.

That makes it a sensible match for mid-size lakes: kokanee and rainbow trout over 30 to 60 feet, walleye along summer breaks, and boats in the 14 to 18 foot range where a long telescopic boom is more reach than the hull needs. The fixed boom also means one less sliding joint to rinse and maintain. The honest limit is line spread. With a 24-inch boom and riggers mounted close together, run shorter setbacks and stagger your depths so stacked lines do not tangle on turns.

Specs

  • Type: Manual
  • Retrieval: 2:1 ratio, one-hand clutch deploy
  • Weight capacity: Up to 20 lb
  • Boom: Fixed stainless steel, 24 in
  • Spool: Composite
  • Cable: 200 ft of 150 lb test stainless steel
  • Mount: Universal mounting base
  • Rod holder: Dual-axis adjustable
  • Depth counter: Three-digit analog

5. Scotty 1071 Laketroller Clamp Mount Manual Downrigger

The Laketroller exists for boats that cannot take a drilled base: small aluminum hulls, canoes, rental boats and kayaks with a flat gunnel or transom edge. Its portable clamp opens to 2 inches and tightens down with no holes and no tools left behind, and the whole unit comes off at the ramp in seconds. The spool pays out one foot per turn with an easy-adjust drag brake, and a Mini Power Grip release is included.

Respect its design envelope. Scotty recommends weights under 4 lb, which makes this a shallow-water tool: stocked trout, kokanee and walleye in the top 30 feet, at modest speeds, on calm lakes. It is not a salmon rigger and was never meant to be. Within that envelope it is genuinely useful, because it gives a 12-foot boat the one thing it normally lacks, a lure held at an exact, repeatable depth instead of a guess behind a sinker. There is no rod holder on the unit, so plan a separate holder or a free hand for the rod.

Specs

  • Type: Manual, clamp-on
  • Mount: Portable clamp, 2 in opening, fits gunnel or transom
  • Retrieval: 1 ft per spool turn, drag brake
  • Boom: Stainless steel, 12 in
  • Cable: 100 ft of 150 lb test stainless steel
  • Construction: Stainless steel and nylon
  • Recommended weight: Under 4 lb
  • Included release: 1181 Mini Power Grip
  • Rod holder: Not included

How to Choose the Right Downrigger

Manual or electric is arithmetic, not preference. Multiply your typical depth by how many times you expect to raise the weight in a day. At 40 feet and six raises, a manual crank is nothing. At 100 feet and twenty raises, it is 2,000 feet of cranking against a 10 lb ball, and an electric motor stops looking like a luxury. Frequency matters as much as depth: a hot bite with doubles firing is exactly when slow retrieval costs you fish.

The depth counter counts cable, not depth. Blowback is the gap between the two. Water resistance pushes the weight back as you troll, so the cable leaves the boom at an angle instead of hanging straight down, and your lure runs shallower than the counter reads, sometimes by a wide margin at higher speeds with a light ball. A heavier weight, a slower troll and thinner line all reduce the angle. Glance at the cable where it enters the water: the closer to vertical it runs, the closer the counter is to the truth.

Budget for consumables, not just the unit. The weight, the release clips and the cable are wear items. Balls are lost to snags and rock piles, clips lose their grip tension, and cable frays at the terminator and needs cutting back and re-terminating. None of that is a defect; it is the running cost of the method. Keep a spare release and the means to re-terminate a cable on the boat, and treat a lost weight as a when, not an if.

Mounting decides everything on small boats. A drilled swivel base on a backing plate is the stable, permanent answer for a dedicated trolling boat. A gimbal mount that drops into an existing rod holder avoids new holes. A clamp mount like the Laketroller’s is the only honest option for thin gunnels, shared boats and rentals, but it caps you at light weights. Match the mount to the hull before you fall for a spec sheet.

Know when a downrigger is the wrong tool. Downriggers fish one depth band with unmatched precision, but they fish it one rod at a time. Leadcore line and snap weights cover the 15 to 40 foot zone across a whole spread of rods for a fraction of the rigging, and diving planers pull lures down and out to the side, which is why walleye trollers love them. If your fish live shallow and spread out, those tools win on coverage. If your fish live deep and concentrated, nothing else holds a lure on them like a downrigger.

Frequently Asked Questions

How heavy a weight do I need?
Match the weight to depth and speed, and never exceed the rigger’s capacity. Light clamp-on units work with weights under 4 lb for shallow trolling. Typical lake fishing with 8 to 10 lb keeps blowback manageable at moderate depths, and deep or fast trolling calls for more. When in doubt, the heavier weight usually fishes better than the lighter one because it runs closer to the depth on the counter.

Can I use a downrigger for walleye, or is it only for salmon?
Downriggers work well for walleye holding over deep summer structure, and they shine when fish suspend at one consistent depth over open water. For shallow, scattered walleye, leadcore and diving planers often cover more water. Many walleye boats carry both and let the depth of the marks on the sonar decide.

Stainless cable or braided line on the spool?
Stainless cable is the standard: strong, durable and required if you run a positive ion control system. Braid runs quieter, with no cable hum, and can reduce blowback slightly, but it cannot carry the ion voltage and it needs different terminators. Either fishes fine; pick based on whether the hum and the ion feature matter on your water.

How many downriggers should a boat run?
Two, one off each corner, is the standard setup and covers most salmon, trout and walleye trolling. A third rigger straight off the stern adds a deep center line on bigger boats. More than that mostly adds tangles unless the crew is experienced and the booms are long enough to keep the spread separated.

Conclusion

Pick the rigger that matches your real depth and your real boat. The Magnum 10 is the dependable electric for deep, frequent trolling; the Optimum 10 TS adds presets, bottom tracking and networking for boats that fish several riggers hard. The Uni-Troll 10 TS is the manual for anglers who still fish deep, the Uni-Troll 5 trims that formula for mid-size lakes, and the Laketroller puts genuine depth control on small boats that cannot be drilled. Get the mount right, respect blowback, keep spare releases aboard, and the counter becomes the most honest number on the boat.

C
Camping Spots Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Downriggers for Trolling Salmon, Trout and WalleyeCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.