Key takeaways
- Compare the best aquarium overflow boxes for sump conversions: flow ratings, drain counts, tank sizes and the flood-safety trade-offs of each design.
As an Amazon Associate we earn from qualifying purchases.
An overflow box is the bridge between a display tank and a sump. It skims the surface film off the display, carries water down to the filtration below, and does it continuously without a pump of its own. Tanks that were not drilled at the factory have two ways to get there: a hang-on-back siphon box that drapes over the rim, or a drill-and-mount overflow kit that passes through the glass. The five boxes below cover both routes, from a nano hang-on unit for tanks up to 30 gallons to a drilled three-drain kit rated for 150-gallon systems.
Affiliate Disclosure: This article contains affiliate links. If you buy through a link on this page, we may earn a commission at no extra cost to you. Products are chosen on specifications and suitability for the jobs described, not on commission.
The Two Designs, Honestly Compared
A hang-on-back (HOB) overflow keeps a siphon alive over the tank rim. Water rises in an inner skimmer box, crosses the rim through a U-tube or a flat continuous-siphon channel, and drops through a bulkhead in the outer box to the sump. Nothing is drilled, so it suits rented tanks, tempered-glass tanks, and setups that may be resold. The weakness is the siphon itself. Air slowly accumulates at the top of the siphon path, and if the siphon ever breaks while the return pump keeps running, the display overfills. Continuous-siphon designs fight this with a vent port that connects to a small air-lifter pump, which constantly pulls air and stray bubbles out of the channel and makes the siphon restart itself after a power cut. That pump is a safety component, not an accessory, and on most boxes it is sold separately.
A drilled overflow removes the siphon from the equation. A hole through the back glass connects an internal surface skimmer to an external drain box, and gravity does the rest. With two drains it can be plumbed Herbie style, one full-siphon drain throttled by a gate valve and one dry emergency drain. With three drains it can be plumbed Bean Animal style, adding a third open-channel drain, which is the quietest and most failure-tolerant arrangement in common use. The cost of that reliability is permanent: a drilled hole cannot be undrilled, and drilling the wrong pane on a tank with a tempered bottom or back panel ends the project and the tank.
Plainly stated, a drilled tank is the more reliable option, and if a tank is empty and its back panel is confirmed non-tempered, drilling is the better long-term answer. The hang-on box is the compromise for tanks that cannot or should not be drilled, and a good one with an air-lifter on the vent port is a workable compromise, not an equal one.
Sizing and the Flood Question
Match the box to the flow your return pump actually delivers at the height of the display tank, not to the pump’s headline rating. An overflow run near its maximum is loud and leaves no margin for a partially clogged skimmer tooth or a snail parked in the drain. Flow ratings also assume clean skimmer teeth and short, straight drain runs; every elbow and every horizontal stretch costs capacity, so treat the maker’s figure as a ceiling under good conditions.
The flood scenario deserves direct language. When power fails, the return pump stops and the display drains down to the skimmer teeth, sending that volume into the sump. The sump must have enough empty reserve to hold it. When power returns, the pump restarts, and any overflow that has lost its prime cannot drain what the pump delivers, so the display overflows onto the floor. Two things prevent that outcome: an overflow design that holds or restores its siphon automatically, and a sump with genuine reserve volume. Test both before stocking the tank: cut the power, watch the sump level, restore power, and confirm the drain re-establishes itself without help.
Noise is the other daily concern. A single open drain gulps air and gurgles. A full-siphon drain tuned with a gate valve runs nearly silent because no air travels down the pipe, which is why the two- and three-drain drilled kits below are the quiet picks, and why a single-drain hang-on box will always need more tuning to approach them.
1. Blue Ocean 600 Overflow Box Continuous Siphon
The Blue Ocean 600 is the hang-on pick for mid-size and larger tanks that cannot be drilled. Instead of a round U-tube it uses a flat continuous-siphon channel over the rim, which resists the bubble build-up that slowly chokes a tube. A vent port on top connects to an air-lifter pump, sold separately, that continuously evacuates air so the siphon holds prime and restarts itself after an outage. It carries a single 1-inch bulkhead drain, so it cannot offer the redundant emergency drain of the drilled kits below; its flood protection rests on the lifter pump keeping the siphon alive, which is exactly why the pump should be treated as part of the purchase rather than an optional extra.
Specs
- Design: hang-on-back continuous siphon overflow
- Flow rating: 600 GPH, as stated by the maker
- Drain: 1 drain, 1 in bulkhead (included)
- Tank size range: up to 125 gallons
- Box dimensions: 7.5 x 8 x 9.75 in
- Air-lifter pump: required for automatic air purge via the vent port; not included
- Includes: skimmer box, siphon channel, bulkhead
2. Seapora Nano Overflow Box (87000)
Small tanks have small margins, and the Seapora Nano is built to that scale. It is a hang-on acrylic box for tanks up to 30 gallons, using a conventional U-tube siphon with a foam cylinder prefilter and a 0.75-inch bulkhead. The smaller bulkhead matches the modest return pumps nano sumps run, and the in-tank footprint stays proportionally small. Seapora does not publish a gallon-per-hour figure for this model, so size it by its stated tank range and the 0.75-inch drain rather than by a flow number borrowed from its larger prefilter siblings. Like every U-tube box, it holds no defence against a lost siphon beyond the sump’s reserve volume, so the power-cut test described above matters even more at this size, where a small overflow volume is still a large share of the tank.
Specs
- Design: hang-on-back U-tube siphon overflow
- Flow rating: not published by the maker
- Drain: 1 drain, 0.75 in bulkhead (included)
- Tank size range: up to 30 gallons
- Item dimensions: 5.25 x 6.3 x 8.5 in
- Material: acrylic
- Air-lifter pump: none fitted; no vent port
- Includes: overflow box, foam cylinder, U-tube, bulkhead
3. Eshopps Eclipse S Overflow Box
The Eclipse S is the entry point to drilled overflows. The kit includes a diamond-coated hole saw and a plastic drilling template, so the only tool the buyer supplies is the drill itself. Inside the tank sits a slim surface skimmer just 1.25 inches deep; outside, a lidded drain box carries two 1-inch drains, which is enough to plumb a Herbie arrangement: one full-siphon drain on a gate valve running silently, and one emergency drain standing dry. Because the drains are gravity-fed through the glass, there is no siphon to lose prime, and restart after an outage needs no intervention. The permanent hole is the trade, and the template only helps if the back panel is non-tempered glass or acrylic, which must be confirmed before the bit touches the tank.
Specs
- Design: drilled through-glass overflow kit
- Flow rating: 600 GPH maximum, as stated by the maker
- Drains: 2 drains, 1 in each, Herbie style (primary plus emergency)
- Tank size range: up to 75 gallons
- External box dimensions: 6 x 6 x 3 in
- Internal skimmer dimensions: 6 x 6 x 1.25 in
- Air-lifter pump: not applicable; gravity drain, no siphon
- Includes: skimmer, external box with lid, bulkheads and gaskets, diamond hole saw, drilling template
4. Eshopps Eclipse M Overflow Box
The Eclipse M is the same drilled concept scaled to the most common reef and planted sizes. The external box grows to 8 inches wide, the flow ceiling rises to 800 GPH, and the two 1-inch drains still support a Herbie layout with a silent full-siphon primary and a dry emergency. For tanks in the 40 to 100 gallon range this is the balanced pick: enough weir length to skim a four-foot tank properly, enough drain capacity for typical return pumps with headroom to spare, and the same included hole saw and template as its smaller sibling. As with the S, a gate valve on the primary drain is the part that makes it quiet, and that valve is plumbing the buyer supplies.
Specs
- Design: drilled through-glass overflow kit
- Flow rating: 800 GPH maximum, as stated by the maker
- Drains: 2 drains, 1 in each, Herbie style (primary plus emergency)
- Tank size range: up to 100 gallons
- External box dimensions: 8 x 6 x 3 in
- Internal skimmer dimensions: 8 x 6 x 1.25 in
- Air-lifter pump: not applicable; gravity drain, no siphon
- Includes: skimmer, external box with lid, bulkheads and gaskets, diamond hole saw, drilling template
5. Eshopps Eclipse L Overflow Box
The Eclipse L is the quiet-drain flagship of this group. Its 12-inch skimmer feeds an external box with three 1-inch drains, which unlocks a full Bean Animal layout: a gate-valve-tuned full-siphon primary, an open-channel secondary that handles small fluctuations, and a third emergency drain that stays dry unless both others fall behind. Run that way, it is effectively silent and tolerates a blocked primary without flooding, the two properties the article title promises and the two a single-drain hang-on box cannot match. It is rated to 1000 GPH for tanks up to 150 gallons, and it asks the most of the installer: three drains of plumbing, a gate valve, and a sump that can accept the drain-down volume of a large display.
Specs
- Design: drilled through-glass overflow kit
- Flow rating: 1000 GPH maximum, as stated by the maker
- Drains: 3 drains, 1 in each, Bean Animal style (primary, secondary, emergency)
- Tank size range: up to 150 gallons
- External box dimensions: 12 x 6 x 3 in
- Internal skimmer dimensions: 12 x 6 x 1.25 in
- Air-lifter pump: not applicable; gravity drain, no siphon
- Includes: skimmer, external box with lid, bulkheads and gaskets, diamond hole saw, drilling template
How to Choose
Start with the drilling question, because it decides the shortlist. If the tank is empty and the back panel is verified non-tempered, choose a drilled Eclipse sized to the tank: S for up to 75 gallons, M for up to 100, L for up to 150 or for anyone who wants the third emergency drain. If the tank is stocked, tempered, or must stay unmodified, the hang-on route remains, with the Blue Ocean 600 covering tanks up to 125 gallons and the Seapora Nano covering the small end up to 30 gallons.
Whichever design wins, three checks close the job. Size the overflow above the return pump’s delivered flow, not level with it. Leave real reserve volume in the sump for drain-down. And run the power-cut test with the tank full of water and empty of livestock, because an overflow that restarts itself on the test is the only kind that can be trusted to do it at 3 a.m. when nobody is watching.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.






Write Your Review
No reviews yet. Be the first to share your experience!