Updated Nov 22, 2026· 12 min read

Key takeaways

  • The best conventional reels for trolling, jigging and big game: star and lever drag picks with real specs, line capacity, drag figures and gear ratios.

As an Amazon Associate we earn from qualifying purchases.

A conventional reel sits on top of the rod with the spool axis across the blank, and that layout exists for one reason: controlled power. These are the reels that troll a spread of baits behind a boat, drop jigs and bait rigs straight down to bottom structure, and hold enough line to stay connected when a big fish makes a long first run. The category splits into star drag and lever drag designs, levelwind and open-frame spools, and single-speed and two-speed gearing, and the right combination depends entirely on which of those three jobs the reel will do most.

Our top pick: Penn Fathom II Star Drag 25N. Runner-up: Shimano TLD 25.

One point of honesty belongs at the front. Conventional reels do not cast like baitcasters for most anglers. There is no magnetic or centrifugal braking system doing the work; spool control on a cast is a thumb skill that takes practice, and many anglers never cast these reels at all. They are built for trolling, dropping and winching, and the five reels below were chosen on drag type, capacity, gearing and frame construction for exactly that work.

Affiliate Disclosure: This article contains affiliate links. If you purchase through them, this site may earn a commission at no additional cost to you.

1. Penn Fathom II Star Drag 25N

The Fathom II 25N is the star drag entry in this group, and it is built around speed. A 6.1:1 ratio pulls 42 inches of line per handle turn, which is what vertical jigging and fast bottom work ask for: slack disappears quickly between jig strokes, and a bait or jig can be brought up through the water column without endless cranking. The narrow 25N spool keeps the reel compact in the hand while still holding 345 yards of 20 lb mono.

Construction is where the Fathom II separates itself from lighter star drag reels. The body and sideplates are full metal, the main gear is machine-cut marine-grade bronze with a hardened stainless steel pinion, and six shielded stainless steel ball bearings plus an instant anti-reverse bearing run the retrieve. The HT-100 Versa-Drag stack delivers a listed maximum of 30 lb, and the Live Spindle design puts the spool on a free-floating spindle so it spins with less friction on the drop. A Fast Gear Access sideplate opens the gear box with fewer screws for drag washer and gear service.

The tradeoff is the star drag itself. Drag pressure is set by turning the star wheel and judged by feel, with no repeatable preset position. For jigging and general bottom fishing that is a fair exchange for the simpler, lighter mechanism; for trolling set-and-forget work, the lever drag reels below give more precise control.

Specs

    • Type: Star drag conventional reel, open frame
    • Model: FTHII25NSD
    • Gear ratio: 6.1:1
    • Retrieve: 42 in (107 cm) per turn
    • Max drag: 30 lb (HT-100 Versa-Drag system)
    • Bearings: 6 shielded stainless steel ball bearings + instant anti-reverse
    • Mono capacity: 345 yd of 20 lb
    • Weight: 19.4 oz (550 g)
    • Construction: Full metal body and sideplates, machine-cut marine-grade bronze main gear
    • Features: Live Spindle free-floating spool, Fast Gear Access sideplate

    2. Shimano TLD 25

    The TLD 25 is the long-running benchmark for lever drag trolling reels, and its specification explains the reputation. The frame is graphite, which does not corrode, keeps weight at 24.5 oz, and has proven durable across decades of charter and private boat use. Inside, a 3.6:1 ratio retrieves 32 inches per turn — slow on paper, but that low gearing is cranking torque, and it is what moves a heavy fish the last fifty feet against drag and boat motion.

    Capacity is the headline. The spool takes 600 yards of 30 lb mono, and with braid the figures climb to 1,015 yards of 50 lb, numbers that cover long trolling setbacks and deep drops without a topshot running out. The lever drag is the other half of the design: a preset knob sets the strike position in advance, the lever then travels between free spool, strike and full in repeatable steps, and the listed maximum drag is 22 lb. Four bearings keep the mechanism simple, and the aluminum spool resists the spool-spreading pressure that heavy mono can exert.

    What the TLD 25 does not offer is speed or a second gear. At 3.6:1 it is the wrong reel for working a jig all day, and anglers who want a low gear for the end of a fight and a high gear for clearing lines should look at the two-speed Penn below. As a dedicated trolling and bait reel, though, the formula is exactly on brief.

    Specs

      • Type: Lever drag conventional reel, single speed
      • Model: TLD25
      • Gear ratio: 3.6:1
      • Retrieve: 32 in per turn
      • Max drag: 22 lb
      • Bearings: 4 ball bearings
      • Mono capacity: 600 yd of 30 lb, 450 yd of 40 lb, 350 yd of 50 lb
      • Braid capacity: 1,015 yd of 50 lb, 980 yd of 65 lb, 845 yd of 80 lb
      • Weight: 24.5 oz
      • Frame: Graphite frame with aluminum spool

      3. Penn Fathom Lever Drag 2-Speed 40NLD2

      The 40NLD2 is the big-game tool in this lineup, built around a two-speed lever drag drivetrain in a full metal body. High gear runs 5.0:1 and recovers 42 inches per turn for clearing trolling lines and gaining on a fish that runs at the boat; a button shift drops to 2.5:1 and 21 inches per turn, a true winch gear for lifting a heavy fish off the bottom or grinding through the final stage of a fight. Few techniques use both gears on the same drop, but trolling and chunking regularly use both in the same hour.

      The drag is Penn’s Dura-Drag system with a listed maximum of 40 lb, the highest figure in this group, and the lever format means the strike setting can be preset on the dock and returned to exactly during a fight. Capacity suits the role: 410 yards of 30 lb mono, or 785 yards of 50 lb braid with room for a mono topshot. Five bearings support the drivetrain, and at 25.7 oz the reel carries the weight expected of an all-metal two-speed without reaching the heft of the largest big-game frames.

      The honest limits are size and complexity. A 40-size two-speed is more reel than inshore jigging needs, the shifting mechanism adds parts that want rinsing and periodic service, and the metal body that makes it durable also adds weight. It earns its place when the target list includes fish that test 40 lb of drag.

      Specs

        • Type: Two-speed lever drag conventional reel
        • Model: FTH40NLD2
        • Gear ratio: 5.0:1 high / 2.5:1 low
        • Retrieve: 42 in high / 21 in low per turn
        • Max drag: 40 lb (Dura-Drag system)
        • Bearings: 5 ball bearings
        • Mono capacity: 410 yd of 30 lb, 315 yd of 40 lb, 235 yd of 50 lb
        • Braid capacity: 785 yd of 50 lb, 665 yd of 65 lb, 565 yd of 80 lb
        • Weight: 25.7 oz (730 g)
        • Construction: Full metal body

        4. Okuma Solterra SLX-15CSb

        The Solterra SLX-15CSb takes the lever drag format and aims it at high-speed work. The CS in the model code denotes Okuma’s high-speed, open-top frame configuration: there is no levelwind and no top bar across the spool, so a thumb rides the line directly, line can be laid by hand on the retrieve, and the spool is fully accessible for casting a bait or jig when the situation calls for it. The listing capacity is 410 yards of 25 lb mono, squarely in the mid-size trolling and bottom fishing class.

        The internal specification is built for load. The main gear, pinion gear and shafts are stainless steel, the drag is Okuma’s Carbonite system treated with Cal’s universal drag grease, and two thrust bearings in the drivetrain reduce handle effort under heavy drag settings. A double-dog silent anti-reverse backs up the retrieve, the drag lever ratchets so adjustments click into place rather than drifting, and the forged aluminum spool carries line capacity rings so remaining line can be judged at a glance. The frame and side plates are corrosion-resistant composite, which keeps the reel lighter in the hand than the all-metal Penn models.

        Because the frame is composite rather than metal, this is a reel for the 15-class workload its capacity describes, not a substitute for a two-speed big-game frame. Within that class, the combination of lever drag, high-speed gearing and an open spool is the jigging and light trolling configuration that the star drag and levelwind designs do not quite replicate.

        Specs

          • Type: Lever drag conventional reel, single speed, high-speed open-top frame
          • Model: SLX-15CSb
          • Mono capacity: 410 yd of 25 lb
          • Drag: Carbonite drag system with Cal’s universal drag grease
          • Gearing: Stainless steel main gear, pinion gear and shafts
          • Bearings: Two thrust bearings; double-dog silent anti-reverse
          • Spool: Forged aluminum with line capacity rings
          • Frame: Corrosion-resistant frame and side plates
          • Features: Ratcheting drag lever, Ergo Grip handle knob

          5. Daiwa Sealine SLW50H

          The Sealine SLW50H is the levelwind option, and the levelwind is the whole argument. A levelwind mechanism lays line evenly across the spool on every retrieve, which removes the need to guide line with a thumb and keeps the spool package flat during long trolling setbacks and repeated drops. For anglers new to conventional reels, that automatic line lay is a genuine functional advantage rather than a convenience.

          The specification is a straightforward high-speed star drag package. A 6.1:1 ratio, a listed maximum drag of 20 lb, capacity of 270 yards of 30 lb mono or 490 yards of 50 lb braid, and a 2-position power handle that lets the grip be set for speed or leverage. The frame is synthetic, which keeps the reel at 1.19 lb and shrugs off corrosion, and the bearing count is a modest two — a simpler internal layout with fewer parts to service.

          The tradeoffs mirror the design. A levelwind adds a worm gear and pawl that can wear or jam if grit gets in, the synthetic frame flexes more than metal under maximum drag, and 20 lb of drag with this capacity defines the ceiling: this is a reel for trolling, bottom fishing and general boat work in the 30 to 40 lb line classes, not for the heaviest big-game duty covered by the two-speed Penn above.

          Specs

            • Type: Star drag conventional reel with levelwind
            • Model: SLW50H
            • Gear ratio: 6.1:1
            • Max drag: 20 lb
            • Bearings: 2 ball bearings
            • Mono capacity: 270 yd of 30 lb, 240 yd of 40 lb
            • Braid capacity: 490 yd of 50 lb, 430 yd of 65 lb
            • Weight: 1.19 lb
            • Frame: Synthetic (composite)
            • Features: Levelwind line guide, 2-position power handle

            How to Choose the Right Conventional Reel

            Start with the drag system, because it shapes how the reel is fished. A lever drag is preset before the trip: a knob sets the strike pressure, and the lever then moves between free spool, strike and full with repeatable positions. That repeatability is what trolling and big-game fishing need, since drag changes mid-fight are made by lever position rather than guesswork. A star drag is set by turning a star wheel under the handle and is judged by feel; it is simpler, lighter and entirely adequate for jigging and bottom fishing, where the drag is usually set once and left alone.

            Gearing comes second. High ratios around 6.1:1 recover line fast and suit jigging, where the reel has to pick up slack and move a jig through the water column. Low ratios near 3.6:1 trade that speed for cranking torque. A two-speed reel removes the choice, offering a fast gear for line management and a low gear for lifting, at the cost of weight, complexity and more parts to maintain. Match the gearing to the technique that will fill most of the reel’s hours, not the occasional one.

            Line guide and frame follow. A levelwind lays line automatically and suits trolling and newcomers; an open frame leaves the spool accessible for thumb control, manual line lay and the occasional cast, and removes the levelwind’s worm gear from the failure list. For frames, metal bodies hold alignment under the highest drag loads while graphite and composite frames resist corrosion and cut weight, and the drag figure should be read against the line class the reel will carry — a reel fished with 30 lb line never needs its full maximum drag.

            Capacity closes the decision, and it should be checked in the line type being spooled. Braid’s thin diameter multiplies capacity several times over mono on the same spool, which matters for deep jigging and long trolling setbacks; mono keeps a place for its stretch and abrasion resistance around structure. Whichever line is chosen, spool to the capacity the listing states for that line rather than estimating from the other.

            FAQ

            What is the difference between a star drag and a lever drag?

            A star drag is adjusted by a star-shaped wheel beside the handle; turning it compresses the drag washers, and the setting is judged by pulling line by hand. A lever drag uses a lever on the side plate that travels a fixed arc from free spool to full, with a separate preset knob that determines how much pressure the strike position delivers. The lever system is repeatable mid-fight, which is why trolling and big-game reels use it; the star system is simpler and lighter, which suits jigging and bottom fishing.

            Can a conventional reel be used for casting?

            It can, with practice, but it is not what the design is for. Most conventional reels have no cast braking system, so the spool is controlled entirely by the angler’s thumb, and an unpracticed cast ends in an overrun. Anglers who cast heavy baits and lures as their main technique are better served by a baitcasting reel with a braking system; conventional reels earn their place trolling, dropping jigs and baits vertically, and fighting fish from a boat.

            When is a two-speed reel worth choosing?

            When the same reel must do two opposite jobs: recover line quickly and then lift against heavy resistance. Clearing other lines when a fish strikes, gaining on a fish running toward the boat, and working a jig all favor the high gear; the final lift of a big fish off deep structure favors the low gear. If a reel will only troll at one speed or only jig, a single-speed model in the right ratio does the same work with fewer parts.

            Is a levelwind or an open frame better?

            Neither is better in general; they trade different things. A levelwind lays line evenly without attention, which helps beginners and keeps a trolling spool tidy, but it adds a worm gear and pawl that wear and can jam with grit. An open frame removes those parts, leaves the spool open for thumb control and manual line lay, and is the standard layout on jigging and big-game reels. Frequent trolling points to the levelwind; jigging and heavy-duty use point to the open frame.

            Conclusion

            The five reels here divide by drag system and job rather than by quality. The Penn Fathom II 25N is the fast, all-metal star drag for jigging and bottom work; the Daiwa Sealine SLW50H adds a levelwind for trolling and general boat duty; the Shimano TLD 25 is the graphite lever drag trolling standard with the deepest spool in the group; the Okuma Solterra SLX-15CSb pairs a lever drag with a high-speed open-top frame; and the Penn Fathom 40NLD2 is the two-speed, full-metal option for fish that test 40 lb of drag. Choose the drag system for the technique, the gearing for the retrieve the technique demands, and confirm capacity in the line type being spooled.

            C
            Camping Spots Editorial Team
            We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
            Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
            Best Conventional Reels for Trolling, Jigging and Big…Check price on Amazon

            More from Amazon

            Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

            Amazon Prime

            Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

            Start a Prime free trial
            Prime for Young Adults

            A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

            See Prime for Young Adults
            Audible

            Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

            Try Audible free
            Amazon Music Unlimited

            Ad-free music streaming. Eligible new subscribers can start with a free trial.

            Try Music Unlimited free

            As an Amazon Associate we earn from qualifying purchases.