Updated Nov 22, 2026· 10 min read

Key takeaways

  • Five screw extractor sets compared for stripped screws and broken bolts: spiral flute, multi-spline and double-ended bits, with sizes, steel and cases.

As an Amazon Associate we earn from qualifying purchases.

A stripped screw head or a bolt that shears off flush turns a ten-minute repair into an afternoon problem. Screw extractors exist for exactly that moment: you drill a centred hole in the damaged fastener, seat a hardened extractor in the hole, and turn counterclockwise so the tool bites harder the more resistance it meets. The five sets in this guide cover the three working styles — spiral flute extractors that wedge themselves in, multi-spline extractors that are driven in and turned with a wrench or socket, and double-ended bits that bore a seat and extract in a single drill setup.

Our top pick: IRWIN HANSON Screw Extractor and Drill Bit Set, 10-Piece (11119). Runner-up: IRWIN HANSON Hex Head Multi-Spline Screw Extractor Set, 25-Piece (53227).

One warning belongs at the top, because every set below shares it: extractors are made hard so they can bite into fastener steel, and hard steel is brittle steel. An extractor that snaps off in the hole leaves you with a plug of hardened metal that an ordinary drill bit will skate across, and the job escalates from extraction to drilling out, thread repair or professional help. Technique, covered below, matters more than which box the tools came in.

How to Choose a Screw Extractor Set

Match the style to the fastener. Spiral flute extractors are the general-purpose default for broken bolts and studs: the tapered left-hand flutes wedge deeper as torque rises. That wedging action is also their weakness — on thin-walled fasteners such as pipe fittings the taper can expand the remains outward and lock them tighter, and the smallest sizes are fragile. Multi-spline extractors have straight splines and a low profile: they are driven into the drilled hole and turned with a socket or wrench, they grip without expanding the fastener as much, and they suit larger bolts and high-torque work. Double-ended bits are the fast option for stripped screw heads: one end burnishes a clean seat in the ruined head, the other end threads in and backs the screw out, all in a reversible drill.

Check the size range against your hardware. Extractors are sold by the diameter of fastener they remove, and each extractor needs its specified drill size — too small a hole and the extractor cannot seat, too large and there is no wall left to grip. Sets that pair each extractor with its matching drill bit remove the guesswork. Camp and field kits mostly meet small screws and bolts up to about 3/8 inch; machinery and vehicle work runs larger, which is where the wide-range spline sets earn their case space.

Left-hand drill bits are worth having. A left-hand bit cuts while rotating counterclockwise, so the drilling itself works to loosen the fastener — a share of broken bolts simply walk out during drilling and never need the extractor at all. If the bit does not free it, the hole it leaves is exactly the pilot the extractor needs.

Read the steel in the maker’s own terms. Cobalt and M2 high-speed steel drill bits hold an edge in fastener steel; hardened high-carbon steel is the traditional extractor material. What no steel grade changes is the brittleness trade-off: hardness is what lets the flutes bite, and it is also what makes them snap under side load or a cheater bar.

Technique: The Part That Decides Whether This Works

Centre-punch first. A punch mark in the exact centre of the broken fastener keeps the drill bit from wandering. A hole drilled off-centre or at an angle leaves one wall thin, and the extractor will grip unevenly, tilt, and break.

Use penetrating oil and time. A seized fastener needs oil worked into the threads and left to soak — minutes at minimum, longer for rust. Heat helps on metal assemblies where it is safe to apply: warming the surrounding part expands it and breaks corrosion’s grip. Keep heat away from fuel lines, seals, wiring, wood and finishes, and never reach for it as a substitute for patience on a fastener that oil has not had time to reach.

Drill straight, slow and with the specified bit. Use the drill size etched for the extractor you plan to use, keep the bit square to the fastener, and run at low speed with cutting pressure — a fast-spinning bit work-hardens the surface and dulls itself. Drill to the depth the maker’s chart gives, no deeper than needed.

Seat the extractor and turn by hand. Tap a spiral or spline extractor into the hole until it bites, then turn it counterclockwise with a tap wrench, socket or wrench in small, steady increments. Steady hand torque is the whole method. Impact drivers, breaker bars and sudden jerks are how extractors snap.

Know the limits before you start. A fastener that is corroded solid, cross-threaded, or a high-grade hardened bolt may defeat any extractor in any set — the extractor is often softer than a grade 8 or 10.9 bolt’s core is hard. If the extractor starts to twist rather than turn the fastener, stop: the remaining options are drilling the fastener out completely and re-tapping, a thread insert, or a machine shop. Recognising that point early is what keeps a bad fastener from becoming a ruined part.

1. IRWIN HANSON Screw Extractor and Drill Bit Set, 10-Piece (11119)

The 11119 is the classic workshop arrangement: five spiral flute extractors, EX-1 through EX-5, each paired with the left-hand cobalt drill bit that drills its pilot hole, all in a hinged metal index case with the sizes etched on each tool. IRWIN describes the flutes as an aggressive left-hand design whose grip increases as resistance increases, which is the spiral principle stated plainly — the harder the fastener fights, the deeper the flutes embed.

The pairing is the point. Because each extractor arrives with its matched bit, there is no chart-diving or near-enough drilling, and the left-hand bits give every job a chance of ending at the drilling stage. Coverage runs from small screws up to 5/8 inch bolts across the five sizes, which spans most camp, trailer and household machinery failures. For one set to keep in a general toolkit, this is the straightforward pick.

Specs

    • Pieces: 10 (5 spiral flute extractors, 5 drill bits)
    • Extractor style: Spiral flute, tapered left-hand flutes
    • Fastener range: Screws and bolts from 3/32 in to 5/8 in across EX-1 to EX-5, per the maker’s selection chart
    • Steel: Hardened high-carbon steel extractors; left-hand cobalt drill bits, per the maker
    • Drill bits included: Yes — one matched left-hand cobalt bit per extractor
    • Case: Metal index case

    2. IRWIN HANSON Hex Head Multi-Spline Screw Extractor Set, 25-Piece (53227)

    The 53227 is built for the larger, harder end of the problem: 25 hex-head multi-spline extractors stepping from 1/8 inch to 7/8 inch in fine increments, each etched with its size and the drill bit to use with it. IRWIN positions the set for high-torque removal of broken studs, bolts, socket screws and fittings, and the hex head means each extractor is turned with a standard wrench or socket rather than a tap wrench.

    The multi-spline design behaves differently from a spiral, and the difference matters on big fasteners. The straight splines are driven into the drilled hole and grip along their length without the strong outward wedging of a tapered spiral, so the remains of the fastener are less likely to be expanded into their threads — and the low-profile head fits where a tall spiral and tap wrench will not. The trade-off is that no drill bits are included: you supply the correct bit for each size yourself, following the etched recommendation.

    Specs

      • Pieces: 25 extractors
      • Extractor style: Multi-spline, hex head, driven with a wrench or socket
      • Fastener range: 1/8 in to 7/8 in, in 1/32 in steps
      • Steel: Hardened high-carbon steel, per the maker
      • Drill bits included: No — extractors only; recommended drill size etched on each piece
      • Case: Plastic storage case

      3. Alden 8440P Pro Grabit Broken Bolt and Damaged Screw Extractor Kit, 4-Piece

      The Grabit Pro takes the stripped-head problem — the commonest failure of all — and solves it inside one drill. Each of the four bits is dual-ended: the burnishing end is run in reverse to bore a smooth, centred seat into the damaged head, then the bit is flipped and the threaded extractor end is run in reverse to grip and back the screw out. There is no separate drilling step, no tap wrench, and the 1/4 inch hex shanks fit quick-change chucks and ordinary drills alike.

      Alden makes the bits in the USA from M2 high-speed steel, tempered twice per the maker for professional-grade hardness. Coverage runs from No. 4 screws up to No. 24 screws and bolts from No. 10 to 5/16 inch, and the maker lists the drive types it handles — Phillips, slotted, hex, Torx, Tri-Wing, Pozidriv and most tamper-resistant heads among them. The honest boundary: this is a tool for damaged heads and free-spinning screws in wood, plastic and metal, not for large seized bolts, and like every extractor it asks for slow speed and a straight push rather than force.

      Specs

        • Pieces: 4 dual-ended bits
        • Extractor style: Double-ended drill bits — burnishing tip one end, threaded extractor tip the other
        • Fastener range: Screws No. 4 to No. 24; bolts No. 10 to 5/16 in, per the maker
        • Steel: M2 high-speed steel, tempered twice, per the maker; made in the USA
        • Drill bits included: No separate bits — the burnishing end bores the seat
        • Case: Black poly case

        4. NEIKO 01925A Screw Extractor and Left-Hand Drill Bit Set, 10-Piece

        NEIKO’s 01925A follows the same proven layout as the classic spiral sets — five spiral flute extractors, #1 through #5, each matched with a left-hand drill bit — in a labelled metal case with a size chart matching fasteners to bits. The drill bits are HSS M2 steel per the maker, and the extractors are alloy steel spiral flutes, with the bit sizes running from 5/64 inch to 19/64 inch.

        That size range defines the set’s territory: small and medium screws, studs and bolts of the sort found on small engines, marine hardware, bicycles and household equipment. The maker’s own instructions follow the standard sequence — centre-punch, drill with the left-hand bit to a shallow depth, then turn the extractor counterclockwise — and the left-hand bits mean some fasteners back out during drilling alone. Treat the smallest extractors with the same respect as any brand’s: they are thin, hard and unforgiving of side load.

        Specs

          • Pieces: 10 (5 spiral flute extractors, 5 left-hand drill bits)
          • Extractor style: Spiral flute
          • Fastener range: Small to medium screws and bolts matched to 5/64 in to 19/64 in drill bits, per the maker
          • Steel: HSS M2 steel drill bits; alloy steel spiral flute extractors, per the maker
          • Drill bits included: Yes — matched left-hand drill bits
          • Case: Metal case with labelled slots and size chart

          5. IRWIN Tools HANSON Screw Extractor and Drill Bit Set, 35-Piece (11135ZR)

          The 35-piece set is the complete bench version of the HANSON system in one case: six spiral flute extractors, EX-1 through EX-6, thirteen multi-spline extractors from 1/8 inch to 1/2 inch, and sixteen left-hand cobalt drill bits matched to them. Between the two extractor families it covers broken studs, bolts, socket screws and fittings from small screws up to 7/8 inch fasteners, with a chart inside the lid walking through the extraction steps and the size pairings.

          This is the set for a workshop that meets broken fasteners regularly and wants both gripping styles on hand — spirals for general work, splines when torque or a thin-walled fitting argues against wedging. Read the overlap honestly before choosing it: its contents subsume what the 10-piece IRWIN set and much of the 25-piece spline set do separately, so it replaces those purchases rather than complementing them. The case is plastic rather than the metal index of the smaller set.

          Specs

            • Pieces: 35 (6 spiral flute extractors, 13 multi-spline extractors, 16 drill bits)
            • Extractor style: Spiral flute and multi-spline combined
            • Fastener range: Screws and bolts from 3/32 in to 7/8 in across the two families, per the maker’s chart
            • Steel: Cobalt alloy steel set; left-hand cobalt drill bits, per the maker
            • Drill bits included: Yes — matched left-hand cobalt drill bits
            • Case: Plastic case with extraction chart printed inside the lid

            Safety and Recall Check

            The hazards of this tool class are mechanical and mostly self-inflicted. Wear eye protection: drilling fastener steel throws sharp chips, and a snapping extractor throws hardened fragments. Never use an impact driver, breaker bar or cheater extension on an extractor — hand torque only, in small increments. Keep hands clear of the drill chuck when running double-ended bits in reverse, and clamp small workpieces rather than holding them. If a fastener needs heat, clear the area of fuel, solvents and flammables first and let penetrating oil flash off before any flame comes near it.

            For recalls, the SaferProducts.gov database (the U.S. Consumer Product Safety Commission’s public recall service) was queried on 2026-11-21 using the RestWebServices/Recall endpoint with the product name “screw extractor”. The query returned an empty result set: no recall records under that name, and none of the five sets in this guide appears in any record returned by broader extractor searches either — the only match was an unrelated kitchen appliance. That is a check of one database at one point in time, not a guarantee, but as of the date checked this product class carries a clean recall record.

            Affiliate Disclosure

            Some of the links in this article are affiliate links. If you buy through them, the site may earn a commission at no additional cost to you. Products are selected on their specifications, size coverage and maker documentation, and inclusion is not paid placement.

            C
            Camping Spots Editorial Team
            We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
            Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
            Best Screw Extractors for Stripped and Broken ScrewsCheck price on Amazon

            More from Amazon

            Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

            Amazon Prime

            Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

            Start a Prime free trial
            Prime for Young Adults

            A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

            See Prime for Young Adults
            Audible

            Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

            Try Audible free
            Amazon Music Unlimited

            Ad-free music streaming. Eligible new subscribers can start with a free trial.

            Try Music Unlimited free

            As an Amazon Associate we earn from qualifying purchases.