Updated Nov 22, 2026· 9 min read

Key takeaways

  • Compare the best magnetic knife strips for kitchens and workshops, from walnut and acacia bars to stainless steel strips, with specs and mounting tips.

As an Amazon Associate we earn from qualifying purchases.

A magnetic knife strip clears the counter, empties the knife drawer and keeps every blade visible and within reach. Instead of a bulky block taking up worktop space, a slim bar on the wall holds chef’s knives, bread knives, cleavers and paring knives flat against the wall, and the same bar works just as well for steel hand tools in a workshop. The catch is that strips vary a lot: face material, magnet layout, length and mounting method all decide how well a bar actually works once it is loaded with heavy blades.

Our top pick: HMmagnets Premium 17-Inch Stainless Steel Magnetic Knife Holder. Runner-up: HMmagnets Premium 24-Inch Dark Walnut Wood Magnetic Knife Holder.

This guide compares five wall-mounted magnetic knife strips across the main styles worth considering: two stainless steel bars, two wooden bars in walnut and acacia, and a steel strip with an etched conversion chart. Every pick below is a wall-mounted strip for knives and steel tools, with the key figures taken from each maker’s own listing and documentation.

What to Look For in a Magnetic Knife Strip

Length. Strips run from compact 10-inch bars to 24-inch rails. Measure your collection before buying: a typical chef’s knife takes roughly two inches of rail once you leave finger room, so a 16-inch strip suits a core set of six to eight knives, while a 24-inch bar handles a full collection plus shears and a steel.

Magnet coverage. Better strips use a full-length line or double rows of magnets, so a blade grips anywhere along the bar. Cheaper bars use segmented magnets with dead spots between them, and a knife placed over a gap can slide. Neodymium magnets pull harder through wood faces; ferrite magnets are common in steel-faced bars.

Face material. Stainless steel faces wipe clean and shrug off splashes, but blades rest directly on metal. Wood faces in walnut or acacia are gentler on edges and suit traditional kitchens, though they need a wipe rather than a soak.

Mounting. Screw mounting into studs or anchors is the secure option for heavy collections. Some bars add an adhesive option for smooth tile or glass, which suits renters but depends entirely on the surface. Whatever the method, the hardware should be in the box.

Holding claims. Treat every holding-strength figure as a maker claim. Real grip depends on how much flat blade surface touches the strip, so a wide cleaver holds differently from a narrow fillet knife on the same bar.

1. HMmagnets Premium 17-Inch Stainless Steel Magnetic Knife Holder

The HMmagnets 17-inch bar is the straightforward steel option in this lineup: a type 304 stainless steel face over a full line of heavy-duty neodymium magnets, so blades grip along the whole length rather than at set points. At 17 inches it is the middle length in the maker’s range, sized for a working set of kitchen knives with room for shears or a honing steel at the end.

Installation is a drill job, and the box contents reflect that: the maker includes a paper stencil for marking the two holes, screws and anchors, plus a spare set. The bar itself is a single unit that slides over the screw heads and locks down into keyhole slots, leaving a clean face with no visible fixings. The same bar doubles as a tool rail in a workshop, holding wrenches, pliers and screwdrivers by their steel shafts and heads.

Specs

  • Length: 17 inches (17 x 1.88 x 0.66 in)
  • Face material: Stainless steel, type 304
  • Magnet coverage: Full line of heavy-duty neodymium magnets
  • Mounting: Screw mount via keyhole slots; stencil template included
  • Hardware included: Yes — screws, wall anchors and a spare set
  • Capacity: Maker states it holds everything from large chef’s knives and cleavers down to small paring knives; no fixed knife count is published

2. HMmagnets Premium 24-Inch Dark Walnut Wood Magnetic Knife Holder

For a big collection and a warmer look, the HMmagnets 24-inch walnut bar stretches the same concept to two feet of rail. The face is solid walnut wood, 0.94 inches thick, which the maker points out leaves clearance for knuckles and bulky handles when you reach for a knife. Behind the wood sits a full line of heavy-duty neodymium magnets on the front face, strong enough on paper to hold the maker’s stated range from heavy cleavers down to skinny paring knives.

Mounting follows the same floating pattern as the steel version: a template in the box marks holes exactly 16 inches apart, screws and anchors are included with a spare set, and the bar slides over the screw heads into hidden keyhole slots. At 24 inches, plan the wall space carefully — this is a strip for a full knife wall in a kitchen or a long tool run above a workbench, and it needs a level, unobstructed stretch of wall.

Specs

  • Length: 24 inches (24 x 2 x 0.94 in)
  • Face material: Walnut wood
  • Magnet coverage: Full line of heavy-duty neodymium magnets, front face
  • Mounting: Screw mount via hidden keyhole slots; mounting template included
  • Hardware included: Yes — screws, wall anchors and a spare set
  • Capacity: Maker states it holds large and heavy knives through to small paring knives; no fixed knife count is published

3. HOSHANHO 16-Inch Acacia Wood Magnetic Knife Strip

The HOSHANHO strip takes a different magnet approach: instead of one line, it runs double rows of built-in magnets through a 16-inch acacia wood face, which spreads the grip across a wider 2.5-inch face. The arc-shaped profile and the natural acacia grain make it one of the more decorative options here, and the maker positions it for kitchen utensils as well as knives — whisks, scissors and spoons included.

It is also the most flexible mount in this guide. The drilled method uses wall plugs and screws, with the bar sliding down over the screw heads to fix in place. For a no-drill install, a 3M adhesive backing is the alternative on smooth, stain-free surfaces such as tile, glass, metal or marble; the maker recommends the screw method for kitchens because of moisture and repeated knife removal, and notes the tape is not suitable for painted, plaster or wallpapered walls.

Specs

  • Length: 16 inches (16 x 2.5 x 0.7 in)
  • Face material: Acacia wood
  • Magnet coverage: Double-row built-in magnets running through the strip
  • Mounting: Screw mount with wall plugs, or 3M adhesive tape on smooth surfaces
  • Hardware included: Yes — screws and wall plugs for the drilled install
  • Capacity: Maker states up to 9 knives, depending on blade width

4. Modern Innovations 16-Inch Stainless Steel Magnetic Knife Bar

Modern Innovations builds its 16-inch bar around a fully magnetic surface: the satin-finished stainless steel face is magnetic across its whole area rather than in bands, so placement is forgiving when you are putting knives back one-handed. The actual bar length is about 15.75 inches, which leaves a small margin at the mounting points.

The mounting design differs from the keyhole style used by HMmagnets. The bar separates from a back mounting panel; the panel, which has pre-drilled holes, is screwed to the wall with the included screws and anchors, and the magnetic bar then snaps onto the panel for a seamless face. Illustrated instructions are included. Beyond knives, the maker lists the bar for scissors, kitchen utensils and workshop tools such as screwdrivers and wrenches, which makes it a fair pick for a garage wall as well as a kitchen.

Specs

  • Length: 16 inches nominal, about 15.75 inches actual
  • Face material: Satin-finished stainless steel
  • Magnet coverage: Fully magnetic surface across the whole face
  • Mounting: Screw-mounted back panel; magnetic bar snaps over the panel
  • Hardware included: Yes — screws, wall anchors and illustrated instructions
  • Capacity: Maker positions it for knives, scissors, utensils and hand tools; no fixed knife count is published

5. Bruno Bianci 16-Inch Magnetic Knife Strip with Cooking Conversion Charts

The Bruno Bianci strip adds a party trick none of the others offer: cooking conversion charts laser-etched into its stainless steel face, putting common volume and temperature conversions on the wall where you cook. The face is type 304 stainless steel over a ferrite magnet, and at 15.7 inches long and just 0.6 inches deep it is the slimmest bar in this guide.

Ferrite is a step down from neodymium in raw pull, so placement matters more here: centre each blade on the strip and let the full flat of the blade make contact. The package keeps things simple, with two screws and two wall plugs in the box for wall mounting, and the maker notes the strip can also attach directly to a magnetic surface such as a refrigerator door. It is a sensible pick for a smaller set of everyday knives where the chart will genuinely get used.

Specs

  • Length: 16 inches nominal (400 x 47 x 15 mm, about 15.7 x 1.85 x 0.6 in)
  • Face material: Stainless steel, type 304, with laser-etched cooking conversion charts
  • Magnet coverage: Ferrite magnet behind the steel face
  • Mounting: Screw mount for walls; can also attach to magnetic surfaces such as a fridge
  • Hardware included: Yes — 2 screws and 2 wall plugs
  • Capacity: Maker states it secures even heavy knives; no fixed knife count is published

Safety and Recall Check

Safe use matters more with wall-mounted knives than with almost any other kitchen storage, because the blades sit exposed. Follow these points with any strip in this guide:

  • Mount out of children’s reach, high enough that small hands cannot grab a handle, and never above a walkway where a falling knife could land on someone.
  • Slide knives off sideways. Place a blade flat against the strip, and when removing it, slide or peel it away sideways rather than pulling it straight out toward you; keep the edge pointing away from your fingers and place knives with the blade facing up on the strip.
  • Ceramic blades will not hold. A magnetic strip only grips ferromagnetic steel, so ceramic knives are not suitable for any of these bars and need a sheath, block or drawer instead.
  • Check the mount regularly. Screws can work loose over time, especially with daily use; a quick check that the bar has no play in it should be part of your routine, and adhesive installs deserve extra scrutiny in steamy kitchens.
  • Mind the magnets. Strong neodymium strips should be kept away from pacemakers at close range and from magnetic media; follow the warnings printed in each maker’s manual.

For the recall check, the U.S. Consumer Product Safety Commission database at SaferProducts.gov was queried on 2026-11-21 through its RestWebServices recall API using the product names “knife holder” and “magnetic knife”. Both queries returned no recall records, and none of the five strips in this guide appears in that database under those searches. That is a check of one database on one date, not a guarantee — it is still worth a fresh search before any strip goes on the wall.

Which Strip Should You Choose?

Pick the HMmagnets 17-inch stainless bar for a no-nonsense kitchen install with strong full-length grip, or step up to the 24-inch walnut version if your collection is large and you want the wood look with hidden fixings. The HOSHANHO acacia strip is the flexible choice for renters and tiled walls, thanks to its adhesive option, while the Modern Innovations bar suits anyone who likes the snap-on panel design for kitchen or workshop tools. The Bruno Bianci is the compact, chart-carrying option for a smaller everyday set. Whichever length you choose, measure your knives first, mount into solid fixing points, and leave room at both ends of the bar — a crowded strip is where accidents happen.

Affiliate Disclosure

This article contains affiliate links. If you buy a product through a link on this page, the site may earn a commission at no additional cost to you. Products are selected on their specifications and suitability for the topic, and commission does not change which strips are included or how they are described.

C
Camping Spots Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Magnetic Knife Strips for Kitchens and WorkshopsCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.