Key takeaways
- Compare five turkey choke tubes by thread system, exit diameter and shot compatibility, with picks for Rem Choke, Invector Plus and 20-gauge guns.
As an Amazon Associate we earn from qualifying purchases.
A turkey’s head and neck make a small target, and a factory full choke often spreads its pattern too thin by the time it reaches 40 yards. A dedicated turkey choke tube squeezes the shot charge through a much tighter exit diameter and stretches the pattern’s effective core farther downrange. The five tubes below cover the most common thread systems, a TSS-specific option, and a 20-gauge pick, so there is a realistic choice for most turkey guns in the woods.
One warning before any product names: a choke tube only fits the thread system and gauge it was machined for. A Rem Choke tube will not thread into an Invector Plus barrel, and forcing the wrong tube can damage both the tube and the barrel threads. Every pick below states its thread system and gauge up front, because buying the wrong thread pattern is the most common and most avoidable mistake in this category.
Affiliate Disclosure: This article contains affiliate links. If you buy through a link on this page, the site may earn a commission at no extra cost to you. Products are selected on specifications and fitment data, not on commission rates.
1. Carlson’s Long Beard XR Turkey Choke Tube — Remington 12 Gauge
Carlson’s built the Long Beard XR tube around Winchester’s Long Beard XR turkey loads and their Shot-Lok resin-protected pellets, and it has become the default recommendation for Remington shooters. The 12-gauge Rem Choke version exits at .660 inch, well into extra-full territory, and the tube’s parallel section — the straight portion before the muzzle — is 25 percent longer than on a conventional choke. A longer parallel section settles the shot column before release, which is the mechanical reason this design is known for round, even patterns rather than a tight center with ragged edges.
The tube is machined from 17-4 heat-treated stainless steel with a blued finish, extends past the muzzle, and is ported. It is a lead-load design at heart: Carlson’s guidance for its turkey tubes allows lead and heavier-than-lead turkey loads, but steel shot larger than #4 should never be fired through them. Hunters who plan to shoot TSS should look at the dedicated TSS tube below instead of assuming this one covers every modern load.
Specs
- Gauge: 12
- Thread system: Rem Choke (Remington 870, 1100, 11-87 and other Rem Choke barrels)
- Exit diameter: .660 in
- Style: Extended, ported
- Material: 17-4 heat-treated stainless steel, blued finish
- Parallel section: 25% longer than conventional chokes
- Shot compatibility: Lead and heavier-than-lead turkey loads; no steel shot larger than #4
- Designed for: Winchester Long Beard XR turkey loads
- Manufacturer part: 70120
- Made in USA
2. Carlson’s TSS Turkey Choke Tube — Remington 12 Gauge
Tungsten Super Shot changed turkey hunting because its dense, small pellets carry energy far past lead ranges — but those hard pellets also demand a tube built for them. Carlson’s TSS Turkey tube is that dedicated option. The Remington 12-gauge version exits at .640 inch, tighter than the Long Beard XR above, and Carlson’s optimized it for Federal Premium Heavyweight TSS loads while confirming it works with other brands of TSS ammunition in the smaller #7 to #9 shot sizes those loads use.
Firing TSS through a tube that was only ever proofed for soft lead is a genuine hazard: tungsten shot barely deforms, so it transmits far more stress to the choke walls. This tube exists so Remington shooters do not have to guess. It is extended and non-ported, machined from 17-4 stainless steel, and like the rest of Carlson’s line it is made in the USA. If your turkey load of choice is a TSS shell in a Remington gun, this is the straightforward match.
Specs
- Gauge: 12
- Thread system: Rem Choke (Remington)
- Exit diameter: .640 in
- Style: Extended, non-ported
- Material: 17-4 heat-treated stainless steel
- Shot compatibility: Built for TSS loads, including Federal Premium Heavyweight TSS; suited to small shot sizes #7–#9
- Manufacturer part: 38000
- Made in USA
3. Avian-X Turkey Choke Tube — Remington Rem Choke 12 Gauge
Avian-X takes a different route to pattern density. Instead of relying on constriction alone, its tube uses internal groove technology with straight rifling: grooves inside the tube grip the wad and stop it from spinning, so the wad separates cleanly and the pellets leave in a more uniform column. The Rem Choke 12-gauge version exits at .665 inch — a touch more open than the two Carlson’s tubes above — which makes it a sensible option for hunters whose patterns with .640–.660 tubes come out blown or overly concentrated at closer ranges.
The tube is extended and ported, with castle cuts on the crown that give a choke wrench positive purchase so the tube seats firmly and comes out without a fight after a wet hunt. Avian-X is part of the GSM Outdoors family, and this tube is aimed squarely at modern high-performance turkey loads in Remington’s hugely common thread pattern.
Specs
- Gauge: 12
- Thread system: Rem Choke (Remington)
- Exit diameter: .665 in
- Style: Extended, ported
- Internal design: Groove technology with straight rifling to stop wad spin
- Crown: Castle cuts for secure wrench fit
- Brand: Avian-X (GSM Outdoors)
4. H.S. Strut Undertaker Pro Turkey Choke Tube — Browning Invector Plus 12 Gauge
Browning and Winchester Invector Plus shooters are not served by the Rem Choke tubes above, and the Undertaker Pro is the pick built for their thread system. It is the current generation of H.S. Strut’s long-running Undertaker line, redesigned by GSM Outdoors for modern turkey ammunition. Like the Avian-X, it uses internal groove technology to separate the pellets from the wad and keep the wad from spinning, concentrating more pellets on the target.
The notable specification here is shot approval: all models in the Undertaker Pro lineup are approved for steel, lead, bismuth and TSS, which removes the load-compatibility guesswork that comes with older lead-only Undertaker tubes. It is an extended tube for 12-gauge Invector Plus barrels, covering Browning guns and Winchester models such as the SX series that share the Invector Plus thread. Owners of the older standard Invector (not Plus) system should note that the two are different thread patterns and are not interchangeable.
Specs
- Gauge: 12
- Thread system: Browning Invector Plus (also fits Winchester Invector Plus models)
- Style: Extended
- Internal design: Groove technology separates wad from shot and prevents wad spin
- Shot compatibility: Approved for steel, lead, bismuth and TSS loads
- Manufacturer: GSM Outdoors (H.S. Strut)
5. TRUGLO Head Banger Long Range Turkey Choke Tube TG187X — Remington 20 Gauge
The 20 gauge has become a serious turkey gauge thanks to TSS and modern Hevi-Shot loads, and the TG187X is TRUGLO’s long-range tube for Remington’s 20-gauge Rem Choke barrels. Its multi-phase groove technology engages the shot cup in stages as it travels the tube, guiding the pellets into a tight, consistent pattern rather than squeezing them in a single abrupt step.
The tube is CNC-machined from heat-treated steel with a polished end face, a detail that matters more than it sounds: a square, polished face seats and seals against the barrel properly, so gas does not leak past the threads and erode them over a season of magnum loads. TRUGLO approves the Head Banger line for Hevi-Shot, Winchester Long Beard XR, Federal Premium 3rd Degree and other high-performance turkey loads. For a youth hunter, a recoil-shy shooter, or anyone carrying a light 20-gauge all morning, this is the pick that keeps the gun pleasant without giving up pattern density.
Specs
- Gauge: 20
- Thread system: Rem Choke (Remington 20 gauge)
- Constriction class: Long Range turkey
- Style: Extended, non-ported
- Material: Heat-treated steel, CNC-machined
- Internal design: Multi-phase groove technology engages the shot cup
- End face: Polished for seating and sealing
- Shot compatibility: Approved for Hevi-Shot, Winchester Long Beard XR, Federal Premium 3rd Degree and other high-performance turkey loads
- Model: TG187X
How to Choose a Turkey Choke Tube
Start with the thread system, not the brand. Rem Choke, Invector, Invector Plus, Beretta/Benelli Mobil, Benelli Crio and Mossberg Accu-Choke are all different thread patterns. The system is stamped on your factory tubes or listed in the gun’s manual. A tube that starts threading and then binds is the wrong system — stop and check rather than forcing it.
Match the exit diameter to your load and your typical range. For 12 gauge, turkey tubes cluster between .640 and .670 inch. Tighter is not automatically better: an extremely tight tube can produce a pattern so concentrated that a bird at 20 yards is easy to miss entirely, and some loads pattern worse when over-constricted. The .640–.665 spread in the picks above covers the realistic working range for lead and TSS loads.
Respect shot compatibility. This is a safety issue, not a preference. TSS and other tungsten loads are far harder than lead. A tube approved only for lead and copper-plated shot should never see a TSS shell, and steel shot larger than #4 does not belong in tight turkey tubes at all. Every pick above states what it is approved for; when in doubt, the tube maker’s published guidance wins over any forum advice.
Ported versus non-ported is a minor decision. Ports vent gas near the muzzle and can take a small edge off muzzle rise, but they also make the shot louder for the shooter and collect fouling. Non-ported tubes are simpler to clean. Pattern density comes from constriction and internal geometry, not from porting, so choose based on maintenance preference.
Pattern the gun — this step is not optional. No choke guarantees a pattern with your gun and your load. Screw the tube in, shoot your actual turkey load at a large paper target at the ranges you honestly expect to shoot, and count the pellets in a 10-inch circle over the head-and-neck area. Change one variable at a time — load or tube, not both. Your ethical maximum range is the distance where that pattern stays dense and centered, and it is set by the pattern board, not by anything printed on a box.
FAQ
Will a turkey choke make my shotgun shoot farther?
It extends the range at which the pattern stays dense enough for a clean kill, but it does not add power to the load. Pellet energy at distance is fixed by the shell. The choke’s job is keeping enough of those pellets on the head and neck, and only patterning your gun shows where that limit actually falls.
Can I shoot TSS through any turkey choke?
No. Only use TSS in tubes the maker approves for it, such as the Carlson’s TSS tube and the Undertaker Pro above. Tungsten shot is much harder than lead and can damage a lead-only tube or, in the worst case, the barrel. Check the approval for your exact tube before loading a TSS shell.
What is the difference between Invector and Invector Plus?
They are two different Browning thread systems with different dimensions, and tubes are not interchangeable between them. Invector Plus barrels are also back-bored to a larger bore diameter, which changes which exit diameter counts as a given constriction. Match the tube to the exact system marked for your barrel.
Should a choke tube be installed hand-tight or with a wrench?
Follow the tube maker’s instruction. Extended tubes with knurled or castle-cut ends are generally seated snugly by hand or with a light wrench turn, and a thin coat of choke tube grease or anti-seize on the threads prevents the tube from seizing in the barrel. Check tightness periodically; a tube that loosens in the field patterns poorly and can be damaged.
Is a .640 tube too tight for close shots?
It can be. At 15–25 yards a .640 pattern may be only a few inches across, which leaves little margin for a moving bird. Hunters who regularly shoot close birds in timber often prefer .660–.665. Pattern at close range as well as far before deciding.
Conclusion
For most Remington 12-gauge turkey guns, the Carlson’s Long Beard XR (.660) is the versatile starting point, and the same brand’s TSS tube (.640) is the correct answer once tungsten loads enter the picture. The Avian-X (.665) suits Remington shooters who want groove-based wad control and a slightly more forgiving pattern. Invector Plus owners get a modern, all-shot-approved option in the H.S. Strut Undertaker Pro, and 20-gauge Remington hunters are covered by the TRUGLO Head Banger TG187X. Whichever tube you choose, confirm the thread system twice, respect the shot approval, and let a pattern board — not marketing — set your maximum range.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.






Write Your Review
No reviews yet. Be the first to share your experience!