Updated Nov 22, 2026· 11 min read

Key takeaways

  • Compare the best bow quivers for hunting, 3D and target archery: quick-detach, two-piece, hip and back models with specs, weights and hood notes.

As an Amazon Associate we earn from qualifying purchases.

A quiver has one job — carry arrows safely and quietly — but where it carries them changes how your whole setup feels. A bow-mounted quiver keeps broadheads protected under a hood and puts a follow-up arrow inches from your hand, yet every ounce it adds hangs off one side of the riser and can nudge your hold and amplify bow noise. A hip or back quiver takes that weight off the bow entirely, which is why 3D and target shooters who walk a course all afternoon usually prefer one, but it leaves arrow tips unguarded and suits field points far better than broadheads.

Our top pick: Trophy Ridge Hex Light. Runner-up: TightSpot Pivot 2-Piece.

This guide compares five quivers across the three main carry styles: a lighted quick-detach hunting quiver, a premium two-piece that splits its weight along the riser, a rubber-lined mid-range detachable, a tube-style hip quiver built for 3D and target work, and a high-capacity back quiver for traditional and field shooting. Each entry lists the specs that actually matter — capacity, mounting style, gripper design, hood and broadhead coverage, and weight — so you can match the quiver to the way you shoot.

Affiliate Disclosure: This article contains affiliate links. If you buy through a link on this page, we may earn a commission at no extra cost to you.

1. Trophy Ridge Hex Light — Quick-Detach Hunting Quiver With a Lighted Hood

The Hex Light is a one-piece, bow-mounted five-arrow quiver built around a problem every early-morning and last-light hunter knows: seating a broadhead into a dark hood without slicing the foam or fumbling the arrow. Four green LED lights solve it — three mounted on top of the hood to light your path-side workspace and one inside the hood itself, so the broadhead pocket is lit exactly where the blades need to land. Green light is used because it is far less likely to alarm game than white light at close range.

The mount is a quick-attach bracket with an adjustable fit, and the quiver pops off with a lever-style release when you want it off the bow in a treestand or blind. Arrow retention comes from adjustable grippers that can be run as a single gripper row or a dual setup for extra hold on rough hikes, and the soft-touch hood coating keeps hard contact quiet. Capacity is five arrows, which matches a typical hunting load of broadheads plus one practice or small-game arrow.

On broadhead honesty: the hood accepts both fixed-blade and mechanical heads, but the pocket is compact, and wide fixed-blade heads are a snug fit that can contact the hood walls. Mechanicals and moderate fixed blades sit more comfortably. If you shoot very wide cut-on-contact heads, check the fit before a hunt rather than assuming full blade clearance.

Specs

  • Type: One-piece bow-mounted quiver, quick-detach
  • Capacity: 5 arrows
  • Lighting: 4 green LEDs (3 on hood top, 1 inside hood)
  • Grippers: Adjustable, single or dual configuration
  • Hood: Soft-touch coated, fits fixed and mechanical broadheads
  • Mount: Quick-attach adjustable mounting bracket
  • Model: AQ110
  • Weight: About 8 oz

2. TightSpot Pivot 2-Piece — Premium Two-Piece That Balances on the Riser

Most bow-mounted quivers hang their entire weight off a single bracket near the sight, which is why bows often feel lopsided with a full quiver attached. The Pivot answers that with a two-piece layout: the hood section and the gripper section mount at separate points, spreading the load along the riser instead of cantilevering it from one spot. The result is a quiver that sits closer to the bow’s center of gravity and disturbs your hold less, at the cost of the one feature it deliberately gives up — two-piece quivers do not quick-detach. This one stays on the bow for the shot and for the season.

Adjustment is the other headline. The Pivot offers full triple-axis positioning — in and out, up and down, and forward and back — so the hood and grippers can be aligned to your arrow length, your sight housing, and your preferred balance point rather than accepting wherever a fixed bracket happens to land. It is sold in right-hand and left-hand configurations, and the full-length hood accepts both fixed-blade and mechanical broadheads.

At 9 ounces including the mounting hardware, it is not the lightest option here, but because the mass is distributed instead of hung off one bracket, it carries its weight better than the number suggests. For a hunter who never removes the quiver to shoot and wants the tightest, most tunable mount, this is the premium end of the category.

Specs

  • Type: Two-piece bow-mounted quiver (fixed mount, no quick-detach)
  • Capacity: 5 arrows
  • Adjustment: Triple-axis — in/out, up/down, forward/back
  • Hood: Full-length, fits fixed and mechanical broadheads
  • Handedness: Right-hand and left-hand versions
  • Weight: 9 oz including mounting hardware

3. Apex Gear Reactor LTE — Rubber-Lined Hood and Thumb-Tab Grippers

The Reactor LTE is the lighter trim of Apex Gear’s Reactor line, a one-piece five-arrow quiver for compound bows. Its most practical detail is inside the hood: instead of a foam insert that broadhead blades chew up over a season, the hood uses a rubber liner. Rubber does not hold cut marks the way foam does, so blades stay seated consistently, and there is no foam shedding into the hood over time. The whole quiver wears Apex’s Tru-Touch soft-feel coating, which deadens the tick and clack noises that hard plastic makes against brush, stands, and other gear.

Arrow handling is built around the gripper design. A thumb tab on the gripper lets you pop an arrow free quickly and quietly with one hand — a small thing that matters when a second shot opportunity appears and noise discipline decides whether you get it. The mounting bracket adjusts for height, which helps align the hood with different arrow lengths and keeps fletching clear of the gripper row.

Gripper spacing deserves a note for modern shaft shooters: the Reactor LTE’s grippers are made to hold the full range of shaft sizes, including the thin micro-diameter carbon arrows that slip through older wide-spaced grippers. If you have moved to 4mm or 5mm shafts, that fit range is the spec to check first on any quiver, and this one covers it.

Specs

  • Type: One-piece bow-mounted quiver
  • Capacity: 5 arrows
  • Grippers: Thumb-tab design for quick, quiet arrow removal
  • Hood: Rubber liner (no foam insert), Tru-Touch soft-feel coating
  • Mount: Height-adjustable bracket
  • Shaft fit: All diameters, including micro-diameter carbon
  • Model: AG235J (Realtree Xtra)

4. LEGEND XT320 Hip Quiver — Three Tubes for 3D and Target Rounds

Bow-mounted quivers make little sense on a 3D course, where you shoot dozens of arrows, walk between targets, and never want the bow’s balance changed by a loaded hood. The XT320 is a hip quiver built for exactly that work. Three rigid arrow tubes keep arrows separated and upright at your side, so field points do not clatter against each other and you can draw the next arrow by feel while watching the target.

The belt is an adjustable waist belt that keeps the quiver riding on the hip rather than swinging from a clip, and the layout includes a T-slot for clipping on accessories such as an arrow puller or release pouch, plus storage compartments for the small gear a round accumulates — scorecards, a pen, spare nocks and points. The design is reversible, so right-handed and left-handed shooters can wear it on the correct side.

The honest limitation is the same one every open hip quiver carries: there is no hood and no blade containment, so this is a field-point quiver for target and 3D arrows. It is not a safe way to carry exposed broadheads, and it is not trying to be. For course and range use, where the bow stays clean and the arrows stay organized, the tube layout is hard to beat.

Specs

  • Type: Hip quiver with arrow separator tubes
  • Tubes: 3
  • Belt: Adjustable waist belt
  • Extras: T-slot accessory mount, storage compartments
  • Handedness: Reversible for right- or left-side wear
  • Construction: Nylon
  • Broadhead use: Not suitable — open tubes, field points only

5. KRATARC Multi-Function Heavy Duty Back Quiver — High-Capacity Traditional Carry

Traditional shooters and field archers who carry a full round’s worth of arrows — plus lunch-adjacent extras — need more than five slots. This KRATARC back quiver is a soft shoulder-hung design that holds up to roughly two dozen arrows, worn over the shoulder so the bow hand and the bow itself stay completely free. A padded shoulder strap carries the load, and the body includes a large storage pocket for an arm guard, spare string, tab or glove, and other flat gear.

The outside carries a MOLLE webbing panel, so small pouches and accessories can be clipped on in a layout that suits your routine rather than a fixed set of pockets. The soft shell keeps the quiver quiet against brush and folds down for transport in a way a rigid tube quiver cannot.

Carry-style honesty matters here too: a soft back quiver has no hood, no foam, and no blade containment, so it is a target and field-point quiver — traditional rounds, 3D courses, and practice sessions. It is not broadhead transport. This version is cut for right-handed draw over the shoulder, so left-handed shooters should choose the mirrored variant rather than fighting the strap geometry.

Specs

  • Type: Back quiver, shoulder-hung
  • Capacity: Up to about 24 arrows
  • Strap: Padded shoulder strap
  • Storage: Large front storage pocket
  • Extras: MOLLE webbing panel for modular pouches
  • Shell: Soft shell, folds for transport
  • Handedness: Right-handed version
  • Broadhead use: Not suitable — no blade containment, field points only

How to Choose the Right Bow Quiver

Decide where the weight should live. A bow-mounted quiver adds its loaded weight to one side of the riser. Five arrows, a hood, and hardware can total well over a pound, and that mass affects your hold, your pin float, and how the bow carries on a long walk. A two-piece design like the Pivot distributes that weight along the riser and balances noticeably better than a single-bracket mount. A hip or back quiver removes the weight from the bow entirely — the cleanest solution for target and 3D shooting, where the bow is shot far more than it is carried through cover.

Match the mount to your habits. One-piece quivers with quick-detach levers suit hunters who hang the quiver in the treestand or take it off for the shot. Two-piece quivers cannot be removed without tools, so they suit hunters who always shoot with the quiver on and want it tucked tight and balanced. Check sight and rest clearance either way: a hood that crowds the sight housing or a gripper row that touches fletching will cost you accuracy and silence.

Check broadhead coverage honestly. A hunting quiver’s hood must fully enclose your broadhead blades — for safety, for blade sharpness, and for noise. Foam inserts hold blades quietly but wear out; rubber liners last longer but can let wide fixed blades sit tight. Hip and back quivers without hoods are field-point tools, full stop, no matter how they are marketed.

Mind gripper spacing if you shoot thin shafts. Micro-diameter arrows need grippers that close down far enough to hold them. Adjustable grippers, or a stated fit range that includes small shafts, are essential if you shoot 4mm or 5mm arrows; a loose arrow rattling in an oversized gripper is both noisy and a fletching-damage risk.

Count arrows for the job, not the brochure. Five arrows is the hunting standard and covers a full quiver of broadheads plus a spare. Course shooting is different: 3D and target rounds reward tube hip quivers and high-capacity back quivers that keep a dozen or more arrows sorted and reachable.

FAQ

Is a one-piece or two-piece quiver better for hunting?
A one-piece quick-detach quiver is better if you remove the quiver to shoot or hang it in a stand. A two-piece quiver balances better and sits tighter to the riser because its weight is split between two mounting points, but it stays on the bow permanently. Choose based on whether you shoot with the quiver attached.

How many arrows should a hunting quiver hold?
Five is the standard hunting capacity and the size of every bow-mounted pick in this guide. It covers a set of broadhead arrows plus a spare without adding unnecessary bulk to the bow. Target and 3D shooters should look at hip or back quivers instead, which carry far more arrows off the bow.

Can a hip quiver be used for bowhunting?
Not safely with broadheads. Hip quivers like the XT320 hold arrows in open tubes with no hood or blade containment, which is fine for field points on a course but leaves exposed blades near your leg in the field. Hunting with broadheads calls for a hooded, bow-mounted quiver.

Do bow quivers fit micro-diameter arrows?
Only if the grippers are designed for them. Thin 4mm and 5mm shafts can slip in wide fixed grippers, so look for adjustable grippers or an explicit all-diameter fit range, like the Reactor LTE lists. Dual-gripper setups also help keep short, thin arrows stable.

Conclusion

For most compound bow hunters, a quick-detach five-arrow quiver is the right default: the Trophy Ridge Hex Light adds a genuinely useful lighted hood for low-light arrow seating, while the Apex Gear Reactor LTE answers with a durable rubber hood liner and grippers that handle micro-diameter shafts. If you shoot with the quiver attached and care about balance above convenience, the TightSpot Pivot’s two-piece, triple-axis design is the premium route. And when the shooting moves to a 3D course or target line, leave the bow clean — the LEGEND XT320’s tubes or the KRATARC back quiver’s capacity will serve you better than any hood on a riser. Match the quiver to where the arrows need to live, and the rest of the specs fall into place.

C
Camping Spots Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Bow Quivers for Hunting, 3D and Target…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.