Updated Nov 22, 2026· 11 min read

Key takeaways

  • Compare five smith machines for solo home lifting: dedicated and combo models checked on bar travel, safety stops, cable stations and what ships.

As an Amazon Associate we earn from qualifying purchases.

A smith machine fixes a barbell to a pair of vertical rails, so the bar travels in one guided path and can be re-racked at any height with a turn of the wrists. For someone who trains alone, that changes the risk profile of squats, presses and lunges: there is no free bar to tip, dump or roll, and the safety stops can be set to catch the bar above your chest or below your squat depth. What a smith machine does not do is balance the load for you in every direction, spot you, or forgive sloppy setup — the sections below are as much about those limits as about the five machines.

Our top pick: Body-Solid Powerline PSM144X. Runner-up: Marcy SM-4033.

The five picks split into three formats. One is a dedicated smith machine and nothing else. Three are smith and cable crossover combos that add pulley stations around the guided bar. One is a cage hybrid that combines a smith bar, cables and a free-weight rack in a single frame. Every pick states its format up front and what actually ships in the box — on four of the five, weight plates are not included.

Affiliate Disclosure: This article contains affiliate links. If you buy through a link on this page, we may earn a commission at no extra cost to you.

What Actually Separates One Smith Machine From Another

Carriage type. The bar rides the rails on either linear bearings or nylon bushings. Linear bearings roll, feel smoother under heavy loads and are the standard on mid-range and combo machines. Bushings slide; a good bushing system on polished chrome rods (Body-Solid calls theirs Super-Glide) is durable and simple, but it drags more than bearings and the feel is noticeable on slow, heavy reps. Neither is a defect — it is the single biggest driver of how the machine feels.

Bar weight and counterbalancing. A smith bar is not a 45 lb Olympic bar. Carriage and bar together can weigh anywhere from the mid-teens to over 35 lb, and a counterbalanced bar offsets most of that so the starting load is close to zero. None of the five machines below is counterbalanced, and only one maker (RitFit) publishes its bar weight at all — 33 lb. Where a maker does not publish a figure, the Specs say so. Log your training loads accordingly: the number on the plates is not the number you lifted.

Plate sleeves. Most home smith bars take Olympic plates on 2-inch sleeves. The exception in this guide is the Powerline PSM144X, whose bar has 1-inch sleeves for standard plates, with Olympic adapter sleeves sold separately. Check which plates you already own before anything else; the wrong sleeve size makes a machine unusable until adapters arrive.

Safety stops and lockout positions. Every smith bar locks onto hooks along the rails — the count runs from 11 settings on the RitFit to 34 positions on the Mikolo. Separately, adjustable safety stops or spotter catches limit how far the bar can fall. The stops are the feature that matters most for solo lifting, and they only work if they are set before the set starts, a point the safety section below returns to.

Recall check. Before finalizing this list, every brand and model was checked against the CPSC recall database at SaferProducts.gov. Product-name searches for smith machines and smith cages return no records for any of the five picks or their model families, and none of the five brands appears against a smith machine recall. The only smith-type recall in the database covers a commercial plate-loaded Cybex Smith Press from 2018 — a different maker and a different class of machine, not in this guide.

The Safety Framing, Stated Plainly

A smith machine is not a spotter substitute. The guided bar removes the need to balance the load front-to-back, but the bar can still pin you if the safety stops are set below the point where the bar reaches your body, and the twist-to-rack motion takes a fraction of a second longer than dropping a free bar onto rack safeties. Set the stops before every working set: just below your lowest squat depth, just above your chest for pressing. Test the re-rack motion with an empty bar until it is automatic.

The fixed path is the second caveat. The rails decide the bar’s line of travel — near-vertical on most home machines, with a slight pitch on a few — and your joints must follow it. That suits controlled pressing and squatting, which is why smith machines are popular for lifters returning from injury. It also means a smith squat is not a free squat: foot position has to move forward of the bar line, and the stabilizer demand is lower. Treat the machine as its own exercise category, not a barbell replacement, and the trade is an honest one.

1. Body-Solid Powerline PSM144X — Dedicated Smith Machine

The PSM144X is the only pure smith machine in this guide: a guided bar in a ladder frame, with no cables, no bench and no stations competing for the footprint. Four 2 by 2 inch, 12-gauge steel pillars carry the Super-Glide carriage, which runs on nylon bushings over chrome guide rods. The bar locks at 14 positions, and a dual-lock spotter catch engages when the bar is twisted, so a failed rep ends on steel rather than on the lifter.

Two compromises define it. The bar has 1-inch sleeves, so it loads standard plates; Olympic adapter sleeves are an extra purchase, and the maker does not publish the bar’s weight. There are also no plate storage pegs on the base unit — plates live on a separate tree or the floor. Body-Solid sells a lat attachment and a pec deck for the frame later, but as shipped this is a one-job machine, and that is its appeal: the smallest footprint here, the simplest assembly, and a 10-year frame warranty behind it. Weight plates and bench not included.

Specs

  • Format: Dedicated smith machine (standalone)
  • Carriage: Super-Glide nylon bushings on chrome guide rods
  • Smith bar: 1-inch sleeves for standard plates; Olympic adapter sleeves sold separately; bar weight not published by the maker; not counterbalanced
  • Smith bar capacity: 400 lb (maker figure)
  • Safety: 14 lockout positions; dual-lock safety spotter catch system
  • Added stations: None as shipped; lat attachment and pec deck available separately
  • Footprint: 45 in long x 76 in wide x 80 in high; about 159 lb assembled
  • In the box: Frame and smith bar only — plates, collars, bench and plate storage not included

2. Marcy SM-4033 — Smith and Cable Crossover Combo With Power Tower

The SM-4033 is Marcy’s fullest combo: a linear-bearing smith bar inside a cage that also carries a dual adjustable cable crossover, a low row cable, a multi-grip pull-up bar, dip handles, a landmine attachment and free-weight bar rests, with an adjustable utility bench in the box. The smith bar and safety catches are each rated at 300 lb, which makes this a beginner-to-intermediate machine by load, whatever the station count suggests. The bench is rated at 600 lb including the user.

The guided bar runs on linear bearings and takes Olympic plates on 2-inch sleeves; Marcy does not publish the bar’s weight. Olympic plate storage posts on the frame keep plates off the floor, and the cable system ships with a short bar and triceps rope among its handles. The honest costs are space and assembly: at 84 inches wide and 86 inches tall it needs a full garage bay and a tall ceiling, and it arrives in several heavy cartons. Weight plates not included.

Specs

  • Format: Smith + cable crossover combo, with bench and power tower
  • Carriage: Linear bearings
  • Smith bar: Olympic 2-inch sleeves; bar weight not published by the maker; not counterbalanced
  • Smith bar capacity: 300 lb (maker figure); safety catches 300 lb; bench 600 lb including user; maximum user weight 300 lb
  • Safety: Adjustable safety catches on the rails; hook lockouts along the bar path
  • Added stations: Dual adjustable crossover pulleys, low row cable, multi-grip pull-up bar, dip handles, landmine attachment, free-weight bar rests
  • Footprint: 70 in deep x 84 in wide x 86 in high (cage)
  • In the box: Cage, smith bar, utility bench and cable handles — plates not included; Olympic plate storage posts built into the frame

3. RitFit M1 Pro — Smith Cage Hybrid With a Free-Weight Rack

The M1 Pro is the hybrid of the group: a smith bar on linear bearings at the back of the cage, a dual plate-loaded cable crossover at the front, and J-hooks with safety arms between them, so a free barbell can be squatted and pressed in the same frame. RitFit is also the only maker here that publishes its smith bar weight — 33 lb — along with an unusually honest capacity split: 352 lb dynamic and 572 lb static on the smith system, against a 1,600 lb maximum for the frame as a whole. Eleven smith height settings is the fewest in this guide, though the spacing covers the working range.

The cable stations load from the same Olympic plates as everything else, rated at 420 lb static per side by the maker, and six 2-inch storage bars on the frame hold the plate collection. This listing is the plate-loaded machine only: the bench is a separate purchase, and RitFit sells a weight-stack package of the same machine under a different listing for buyers who do not want to load plates for cable work. Weight plates and bench not included.

Specs

  • Format: Smith cage hybrid — smith bar, cable crossover and free-weight rack in one frame
  • Carriage: Linear bearings, with spring protection on the smith carriage
  • Smith bar: 33 lb (maker figure); Olympic 2-inch sleeves; not counterbalanced
  • Smith bar capacity: 352 lb dynamic / 572 lb static (maker figures); frame maximum 1,600 lb
  • Safety: 11 smith height settings; adjustable safety arms (575 lb static, maker figure) for free-weight work
  • Added stations: Dual plate-loaded cable crossover (420 lb static per side), pull-up bar, dip bars, J-hooks and safety arms
  • Footprint: 79.1 in long including the bar x 63 in wide x 85.3 in high; 20.9 sq ft; about 339 lb
  • In the box: Cage, smith bar and cable handles, six plate storage bars — plates and bench not included

4. Mikolo M4 — Smith and Cable Crossover Combo, Highest Smith Rating

The M4 wraps a smith machine, a power cage and a dual-pulley cable system into one 2 by 2 inch steel frame, and its maker figures are the largest in this guide: a 600 lb rating on the smith bar, 500 lb on the safety catches and 2,200 lb for the frame overall. Those are frame and carriage ratings rather than a suggestion — the practical ceiling for most lifters will be set by the plates they own — but the headroom is real, and the 34 height positions at 2-inch spacing give the finest stop adjustment here.

The bar rides a guided carriage on solid steel guide rods and loads Olympic plates. Around it sit a lat pulldown with a leg hold-down attachment, a low row with footplate, two independent cable pulleys at a 1:2 ratio rated at 400 lb per side, a pull-up bar, dip bars, a landmine and J-cups with 20-inch spotter arms for free-weight work. Storage is built in: four standard and two fractional Olympic plate posts plus two barbell holders, which push the overall width to about 74 inches. Mikolo does not publish the smith bar’s weight. Weight plates and bench not included.

Specs

  • Format: Smith + cable crossover combo in a power-cage frame
  • Carriage: Guided carriage on solid steel guide rods
  • Smith bar: Olympic 2-inch sleeves; bar weight not published by the maker; not counterbalanced
  • Smith bar capacity: 600 lb (maker figure); safety catches 500 lb; frame capacity 2,200 lb overall
  • Safety: 34 height positions at 2-inch spacing; 20-inch spotter arms for free-weight work
  • Added stations: Lat pulldown with leg hold-down, low row with footplate, dual independent cable pulleys (1:2 ratio, 400 lb per side), pull-up bar, dip bars, landmine, J-cups
  • Footprint: 70.6 in long x 74.1 in wide including storage posts x 87.1 in high; about 375 lb
  • In the box: Cage, smith bar, leg hold-down, lat bar, T-bar, cable handles and landmine — plates and bench not included; plate storage posts and barbell holders built in

5. Marcy MD-9010G — Smith and Cable Crossover Combo With Pec Deck

The MD-9010G is Marcy’s long-running Diamond Elite cage, and it takes the opposite route from the SM-4033: instead of a power tower it adds a pec deck and a leg developer to the smith and cable package. The smith bar runs on linear bearings, takes Olympic plates, and is rated at 300 lb, with a maximum user weight of 300 lb — the same solo-lifting envelope as its sibling, aimed at general full-body training rather than heavy bar work.

The dual cable system covers high and low pulley work, and the box is generous with handles: a lat bar, tricep rope, V-bar, ankle strap and two single D-handles are included, along with the adjustable bench. Olympic plate storage pegs are built into the frame. There is no pull-up bar, which is the clearest single difference from the SM-4033, and Marcy does not publish the smith bar’s weight. With the bench in place the system stretches to about 95 inches long, so measure the room, not just the cage. Weight plates not included.

Specs

  • Format: Smith + cable crossover combo, with bench
  • Carriage: Linear bearings
  • Smith bar: Olympic 2-inch sleeves; bar weight not published by the maker; not counterbalanced
  • Smith bar capacity: 300 lb (maker figure); maximum user weight 300 lb
  • Safety: Adjustable safety catches on the rails; hook lockouts along the bar path
  • Added stations: Dual high and low cable pulleys, pec deck, leg developer; no pull-up bar
  • Footprint: 79 in wide x 95 in long with bench in place x 85 in high; about 400 lb assembled
  • In the box: Cage, smith bar, utility bench, lat bar, tricep rope, V-bar, ankle strap and two D-handles — plates not included; Olympic plate storage pegs built into the frame

How to Choose Among the Five

Start with the plates you own. Standard 1-inch plates point to the Powerline PSM144X or to buying adapter sleeves; Olympic plates work everywhere else in this guide. Next, decide how much machine you actually want. The PSM144X is the honest minimum — a guided bar, 14 lockouts and nothing else to assemble, maintain or walk around. The two Marcy cages trade that simplicity for stations: the SM-4033 if pull-ups, dips and a landmine matter, the MD-9010G if a pec deck and leg developer matter more.

The RitFit M1 Pro is the pick for anyone who wants to keep free-bar training in the same footprint, and it is the only machine here that publishes both its bar weight and a dynamic-versus-static capacity split. The Mikolo M4 is the pick for load headroom and adjustment granularity, provided the room takes its full width with storage posts. On every machine, the routine is the same: set the safety stops before the set, learn the re-rack twist with an empty bar, and remember that the plates on the bar are only part of the load — the carriage is the rest.

C
Camping Spots Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Smith Machines for Home Gyms and Solo…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.